4 channel amp 4x40-50 rms

Hookedup12
10+ year member

Senior VIP Member
195
0
NC
I have two pair of pioneer crapsteers and I need a decent four chan to power for the time being until I can find some better replacements I'm just tired of running them off my kenwood excelon hu, I get some distortion after bout an hour of cont. loud play I figured its just getting too hot I turn it off for a few min and turn it back on and it's fine

 
I have two pair of pioneer crapsteers and I need a decent four chan to power for the time being until I can find some better replacements I'm just tired of running them off my kenwood excelon hu, I get some distortion after bout an hour of cont. loud play I figured its just getting too hot I turn it off for a few min and turn it back on and it's fine
Pm'd

 
150 or less is my limit right now since I prob won't run it for long seeing how ill be changing speakers soon

 
150 or less is my limit right now since I prob won't run it for long seeing how ill be changing speakers soon
Sent you a pm, but here's the link to the FS ad. Phoenix gold four channel

Made in America. Rated at 35x4 @4 ohms, but it's under rated, for sure. One ohm stable per channel, two ohms bridged. Pm me if you're interested, I'll give you a nice deal since i'm wanting to buy my new mids tonight.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

It would also be easy to add an equalizer to have individual rca inputs for all of the channels. A decent one can be had for less than $40...
6
136
Pretty much. It's just a nice kit. A solo rite Scarlett 2i2, XLR mic and a loop back cable are my next purchases so I can get accurate phase...
10
560
It is Opel (Vauxhall) Astra J 2011 model, I change the HU to Kirinavi 10 inch screen. The factory speakers are Infinity and would have come with a...
3
724
Okay, I'll bite. If you're going to get rear speakers, get the same ones (model type, doesn't have to be the same size) that you have up front...
1
949
I would keep the amp you have and keep the components. Place the components in some universal door pods, and look at getting a powered SAS 8"...
13
1K

About this thread

Hookedup12

10+ year member
Senior VIP Member
Thread starter
Hookedup12
Joined
Location
NC
Start date
Participants
Who Replied
Replies
9
Views
946
Last reply date
Last reply from
audiobaun
20240518_170822.jpg

Dylan27

    May 18, 2024
  • 0
  • 0
20240517_190901.jpg

Dylan27

    May 18, 2024
  • 0
  • 0

New threads

Top