4 10"s 40" wide box....

[Popwarhomie 5,000+ posts]

Need some ideas. I want to run 4 AT 10"s but im limited to 40" wide box and 17" tall. I want them all forward firing and sealed off from the trunk.

Someone work your box magic.

My odd trunk opening.. Probably will have to build the box inside the car.

Excuse the mess in the picture its about a year old and just was testing everything out.

Click to read more...

 

[pro-rabbit 5,000+ posts]

Would likely have to do some kind of angle to the front in order to get the area needed to mount them.

 

[bumpinexploder 10+ year member]

at 17 tall you could stagger them just enough to get away with room on either side. and then angle the baffle just a bit to keep them from smashing your cabin opening braces. and as far as loading it might hinder your 2 outside subs.

 

[Popwarhomie 5,000+ posts]

//content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

That wood was actually 16" tall so I would have another inch to work with..

Now 2 4" aeros or 1 6"...

 

[bumpinexploder 10+ year member]

1 6 all the way. lil more port area

 

[Popwarhomie 5,000+ posts]

One 6" enough port for 4 10s? Might be able to get three 4"s

 

[THATpurpleKUSH 5,000+ posts]

Do a clamshell with the woofers firing inwards at each other and vent it towards the front of the vehicle

 

[Popwarhomie 5,000+ posts]

Do a clamshell with the woofers firing inwards at each other and vent it towards the front of the vehicle

That would be cool.

 

[pro-rabbit 5,000+ posts]

Do a clamshell with the woofers firing inwards at each other and vent it towards the front of the vehicle

That was kind of the idea I was going to suggest, was waiting to get home to do a rough draw of it to give the idea..but you seemed to have got the point a crossed lol

 

[THATpurpleKUSH 5,000+ posts]

here's a crude ms paint drawing of how it would look:

 

[mklett33 10+ year member]

here's a crude ms paint drawing of how it would look:

Best drawing ever! Haha, i like it. I think you would still have to stagger the subs on their mounting surface though

 

[THATpurpleKUSH 5,000+ posts]

Best drawing ever! Haha, i like it. I think you would still have to stagger the subs on their mounting surface though

no staggering needed unless you are limited by the depth of the box.

 

[Popwarhomie 5,000+ posts]

How would I figure out the cubic foot of a box like that?

 

[Austin175 10+ year member]

Have someone on here make you a design like that //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif is one way lol but I agree that clamshell would be sweet.

 

[BassMechkanic 10+ year member]

4th order, port thru rear deck with 2 6" aeros.....