4.0 cu to work with

[cocoleveo7686 10+ year member]

Right now I have a 2000 watt rms amp amp running a 12" rf t2 subwoofer in a 2.5cu box tuned to 34hz. I absolutely love thesound and quality of it but I want something louder. I dont have the electrical to upgrade my amp so I wanted to know what would sound louder and best since im used to 12" subwoofers. Either 1 15, 2 12s or 3 10s. Is 4.0 cu enough for 2 12s? Let me know your opinions.

Click to read more...

 

[Full Tilt 10+ year member]

4 cubic feet (gross) may be pushing it to fit a ported dual 12 setup. I'd put a nasty 15 in there and see what you can do. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[Giovanni15 10+ year member]

i agree i have an fi bl 15 in a box to small for it with a hifonics 1600.1d and it already sounds good. im getting a custom box built to 4 cubes net so it'll really sound nice. if youre going to push 2000 rms to a 15 with the right box i think it will sound a hell of a lot better than dual 12s. if you get the right 15

 

[cocoleveo7686 10+ year member]

Its 4 cu after displacement and everything. I thought most 12s were good on 2.0 cu?

 

[cocoleveo7686 10+ year member]

Its 4 cu after displacement and everything. I thought most 12s were good on 2.0 cu?

 

[audiobaun 5,000+ posts]

Its 4 cu after displacement and everything. I thought most 12s were good on 2.0 cu?

Depends on which sub you buy/get..Mine in my sig do just fine in 2.06 cu. ft @32htz after displacement per chamber/sub.There should be several Heavy 12s to choose from that you can place in 4 cu.ft,that get down just fine.I have 2 heavy 1k rms tens in 4 cu ft shared chamber @34 htz,and they slamm!!

 

[cocoleveo7686 10+ year member]

Depends on which sub you buy/get..Mine in my sig do just fine in 2.06 cu. ft @32htz after displacement per chamber/sub.There should be several Heavy 12s to choose from that you can place in 4 cu.ft,that get down just fine.I have 2 heavy 1k rms tens in 4 cu ft shared chamber @34 htz,and they slamm!!

What 12s do you recommend?

 

[cocoleveo7686 10+ year member]

Depends on which sub you buy/get..Mine in my sig do just fine in 2.06 cu. ft @32htz after displacement per chamber/sub.There should be several Heavy 12s to choose from that you can place in 4 cu.ft,that get down just fine.I have 2 heavy 1k rms tens in 4 cu ft shared chamber @34 htz,and they slamm!!

What 12s do you recommend?

 

[Dmac1991]

What 12s do you recommend?

XFL 12s

 

[hispls 5,000+ posts]

What are you looking to spend? I have a really strong 15 here that should go pretty nicely in 4 cube. IMO 2 cube is cutting it close for most 12's.