3in. vs. 4in. coils

[bassmanaudio 10+ year member]

The Adassa ADA-SPL18-1 has a 4" coil and 6 spiders and a 660oz we have had no problen with it.The 4" will kake more power

 

[snoopdan 5,000+ posts]

^^ im sure the chrome tape helps too

 

[DJ Nitrous 427 10+ year member]

Heres a 4" coil for the first Digital Designs 9917

The coil that came out of my Destroyer looked just like that only was a hair smaller diameter waise, but the coil out of the CSP was alot shorter than that...Ill see if I can find a camera this afternoon

Also notice that not all 4" coils stack up one against each other in windings/material.

One thing I have nowticed in dealing with Death Penality recones is that .... as far as I can tell ... the D1 coils use a larger diameter wire than the D2s which means more winds to achieve the same coil height...is that a factor in your pictures?... just curious

 

[bassmanaudio 10+ year member]

^^ im sure the chrome tape helps too

Hey man you have a problem? we are talking about 4" coil not chrome tape

 

[DJ Nitrous 427 10+ year member]

The Adassa ADA-SPL18-1 has a 4" coil and 6 spiders and a 660oz we have had no problen with it.The 4" will kake more power

Is that a big chunk of the basket missing?

 

[themommyvan 10+ year member]

reflexion off of chrome tape

 

[bassmanaudio 10+ year member]

and you provided not one useful piece of info, all you did was post a pic of your garbage speaker.. all ive seen from yuo is borderline product pushing anyhow, you and your equipment=trash.

Hey you have a lot of mouth on a forum i'm not Andrew you come and talk like that to people that come on the forum and the mods let it happen all the time. Its cool i'm not going to get into that bullshit with you say what you want //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[bassmanaudio 10+ year member]

Is that a big chunk of the basket missing?

No its not its a reflection of the bar

 

[audioarsonal 10+ year member]

^^^It appears to be something holding the rod so it doesn't bang against the basket and motor.If you look at the motor it has a piece of black material between it as well.

As for the coil's DevilDriver was right if all factors are equal the 4" would have more winding in the gap thus increasing power handling.But you also have to account for other varibles as well.

 

[audioarsonal 10+ year member]

No its not its a reflection of the bar

That is NOT a reflection.....

 

[bassmanaudio 10+ year member]

That is NOT a reflection.....

i have the car m8 so what is it then ?

 

[audioarsonal 10+ year member]

i have the car m8 so what is it then ?

Your right.But the piece in the rear isn't.It appears wider then the bar and looks sandwiched between the bar and motor.

 

[bassmanaudio 10+ year member]

Your right.But the piece in the rear isn't.It appears wider then the bar and looks sandwiched between the bar and motor.

its not

it has a big gap were the bar is it how the pic was kaken

 

[bassmanaudio 10+ year member]

ok lets go back to the topic

 

[audioarsonal 10+ year member]

Not trying to argue.I understand its yours.I just thought it was something to prevent damage to the sub.