iXvXi
10+ year member
Junior Member
I was wondering if I'm able to use 3 subs with my current setup..
My current Setup
Single Sub
http://sonicelectronix.com/item_8754_Rockford+Fosgate+Punch+P2D412.html
Sub Amp
http://www.crutchfield.com/App/Product/Item/Main.aspx?g=120&i=575P3001P&c=3&tp=115
Speaker amp
http://www.crutchfield.com/App/Product/Item/Main.aspx?g=120&i=500MRPF250&c=3&tp=115
Components
http://www.shopping.com/xPO-Infinity-Infinity-Reference-5010CS-Component-Speaker-System-5-1-4-2-Way-with-Soft-Dome-Tweeter
Sub Box
http://www.bestbuy.com/site/olspage.jsp?skuId=7008542&productCategoryId=abcat0302036&type=product&tab=2&id=1099392684268#productdetail
What I'm wanting to put in..(They are just lying around)
Subs
http://www.crutchfield.com/App/Product/Item/Main.aspx?search=visionik&i=028V123BP
Amp
http://www.monstermarketplace.com/Automotive/Landing4681a61.html
Car
http://www.conceptcarz.com/vehicle/z187/Chevrolet_Cavalier_Z24.aspx
If possible I'm most likely going to build a box for the most of the trunk and just scrap my old box..
I realize I'm probably going to need a new battery and maybe a capacitor or a alternator upgrade or something to that extent..
My idea was to make the two visonik subs run of the 2 channel and my original Rockford sub run off the mono Rockford p3 amp..So basically I would have 3 amps (one for components one for sub and one for 2 subs)
Somehow I would need to branch off the power to all three..and get some Y splitters for the two sub amps?
like I said I don't even know if this is possible..I never thought of doing it until I seen them laying in the basement
(If there is anyway to get it to work without have to buy a 200A alternator please tell me)
(The only 200A alternator I found that works with my car goes on average of 500$)
My current Setup
Single Sub
http://sonicelectronix.com/item_8754_Rockford+Fosgate+Punch+P2D412.html
Sub Amp
http://www.crutchfield.com/App/Product/Item/Main.aspx?g=120&i=575P3001P&c=3&tp=115
Speaker amp
http://www.crutchfield.com/App/Product/Item/Main.aspx?g=120&i=500MRPF250&c=3&tp=115
Components
http://www.shopping.com/xPO-Infinity-Infinity-Reference-5010CS-Component-Speaker-System-5-1-4-2-Way-with-Soft-Dome-Tweeter
Sub Box
http://www.bestbuy.com/site/olspage.jsp?skuId=7008542&productCategoryId=abcat0302036&type=product&tab=2&id=1099392684268#productdetail
What I'm wanting to put in..(They are just lying around)
Subs
http://www.crutchfield.com/App/Product/Item/Main.aspx?search=visionik&i=028V123BP
Amp
http://www.monstermarketplace.com/Automotive/Landing4681a61.html
Car
http://www.conceptcarz.com/vehicle/z187/Chevrolet_Cavalier_Z24.aspx
If possible I'm most likely going to build a box for the most of the trunk and just scrap my old box..
I realize I'm probably going to need a new battery and maybe a capacitor or a alternator upgrade or something to that extent..
My idea was to make the two visonik subs run of the 2 channel and my original Rockford sub run off the mono Rockford p3 amp..So basically I would have 3 amps (one for components one for sub and one for 2 subs)
Somehow I would need to branch off the power to all three..and get some Y splitters for the two sub amps?
like I said I don't even know if this is possible..I never thought of doing it until I seen them laying in the basement
(If there is anyway to get it to work without have to buy a 200A alternator please tell me)
(The only 200A alternator I found that works with my car goes on average of 500$)
