I have custom painted sparkly red/black 3 insignia IS-PCSS101 amps. I was going to use them on 3 11kv.2's but I think I am going to go with one big amp because it will be easier for me to just cut one plexiglass window in the enclosure I am making.
Here are a couple pictures I can scrounge up just to gauge interest. 30 bucks plus shipping via ups for each one. The paint job is not proffessional as I was just worried about what they look like from a top view, but they do look pretty darn good. I painted in as dust free of an environment as I could make in my garage. Anyway on to the pics.

My camera's coloring gets a little off balance at times, but these are candy apple red with black underneath. Here are the specs on the amps
RMS power 13.8VDC
Power 4 Ohms............................... 120W 2
Power 2 Ohms............................... 200W 2
Bridged power 4 Ohms ................. 360W 1
Minimum speaker impedance.............. 2 Ohms (stereo)
THD distortion....................................... 0.08%
IMD distortion........................................ 0.08%
Frequency response............................. 20 Hz to 20 KHz
Input sensitivity..................................... 200mV to 6V
Input impedance ................................... 15K
Signal-to-noise ratio............................. 90dB
Channel separation............................... 50dB
Crossover network
Low pass filter.................................... 45 Hz to 300 Hz
Bass boost......................................... 0dB to +12dB
High pass filter................................... 45 Hz to 300 Hz
Fuse rating............................................. 20A 2
Size L W H ....................................... 15.67 10.16 2.56 inches
Here are a couple pictures I can scrounge up just to gauge interest. 30 bucks plus shipping via ups for each one. The paint job is not proffessional as I was just worried about what they look like from a top view, but they do look pretty darn good. I painted in as dust free of an environment as I could make in my garage. Anyway on to the pics.

My camera's coloring gets a little off balance at times, but these are candy apple red with black underneath. Here are the specs on the amps
RMS power 13.8VDC
Power 4 Ohms............................... 120W 2
Power 2 Ohms............................... 200W 2
Bridged power 4 Ohms ................. 360W 1
Minimum speaker impedance.............. 2 Ohms (stereo)
THD distortion....................................... 0.08%
IMD distortion........................................ 0.08%
Frequency response............................. 20 Hz to 20 KHz
Input sensitivity..................................... 200mV to 6V
Input impedance ................................... 15K
Signal-to-noise ratio............................. 90dB
Channel separation............................... 50dB
Crossover network
Low pass filter.................................... 45 Hz to 300 Hz
Bass boost......................................... 0dB to +12dB
High pass filter................................... 45 Hz to 300 Hz
Fuse rating............................................. 20A 2
Size L W H ....................................... 15.67 10.16 2.56 inches
