3 cubes sealed....which 12's??

[Ridinhi 5,000+ posts]

Made a sealed enclosure thats 1.5 cubes each. Was thinking about the CVX or the RSD. Anyone with any other suggestions? Amp will be a kx 1200.1,subs will need to be ran at 1ohm. I listen to rap/r&b mostly. Im looking for the most spl I can get from a sealed box,but I do want some sq. Any input will be appreciated.

Click to read more...

 

[jacka 10+ year member]

i have my rl-p's in 1.5 sealed with a MD2. the SQ is good IMO and the output is more than enough for me, i have a trunk car too. the RSD's are supposed to have pretty nice SQ too if you were thinking of those.

 

[mr_imperial 10+ year member]

between the two u were looking at id go with the rsd's. they have been gettin good reviews and they are cheaper...

 

[Ridinhi 5,000+ posts]

Thanks for the idea,Ill check them out. But it still is kindof hard to beat the price of the Rsd's.

 

[mmata13 10+ year member]

cvx should be ok... type s umm or sum pioneer

 

[Towncar 10+ year member]

Made a sealed enclosure thats 1.5 cubes each. Was thinking about the CVX or the RSD. Anyone with any other suggestions? Amp will be a kx 1200.1,subs will need to be ran at 1ohm. I listen to rap/r&b mostly. Im looking for the most spl I can get from a sealed box,but I do want some sq. Any input will be appreciated.

Two totally different subs. If you are looking for alot of spl the cvx's will do well for you. The rsds weren't ment for that.

 

[Curel 10+ year member]

rsd's or diamonds m6/d6 subs also need some attention.

 

[Ridinhi 5,000+ posts]

rsd's or diamonds m6/d6 subs also need some attention.

Thought about the diamonds also,just thought that 1.5 cubes was too big for the 12"?????

 

[Immacomputer 10+ year member]

I would grab some Type-Xs if you could afford it. For getting loud while sealed, look for some high excursion drivers that have a mid to high Qts value. With sealed enclosures, displacement is everything.

 

[Cbass 10+ year member]

A pair of pioneer 3004spl should do the work IMO

 

[Ridinhi 5,000+ posts]

A pair of pioneer 3004spl should do the work IMO

Thought these needed to be ported?

 

[Ridinhi 5,000+ posts]

Dont want to start any flames but what about the type r?