3 15" MtX 9500's

Go with 2 15's ported
they only need ~2 cubes each ported

i almost tried the 9500's myself, but nobody has the strokers, so i had to try them first. maybe next go-round
You got the new stroker ? I'm waiting for an hour from woofersetc for a pair. How are they ?

 
dunno, broke one of the terminals on my box, then dropped the replacement into the port, haven't finished my doorpods cause my roomate hasn't paid me rent yet this month, and my car's off the road cause i have an electrical short causing my alarm not to arm.

i'm excited as hell to get them in, but **** keeps piling up

if i give up and kill myself, i'll will them to you

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Thanks buddy! Given me a lot to think about in terms of what to do; I've been watching YouTube videos on this stuff all day as well so I really...
4
862
You can wire those subs up @8 ohms if they are both SVC4 ohm subs,and that amp will run fine after being tuned properly...
4
1K
The 240 should be 2x40/ 2ch. rated at 11.9v. Should generate close to 50+ @14v rms. Only Rated @4 ohms bridged Mono.. Should be around 125 rms...
5
2K
In 1990: The MTX MTA 225 had a MSRP of 549.95 25x2 0.02% THD S/N 102 12x 8 1/2x 2 3/8 The MTX MTA 250 had a MSRP of 649.95 50x2 0.02% THD S/N...
5
2K

About this thread

mytrunkoncrank

10+ year member
Junior Member
Thread starter
mytrunkoncrank
Joined
Location
HOUSTON,TX
Start date
Participants
Who Replied
Replies
6
Views
429
Last reply date
Last reply from
yacob.naif
Screenshot_20240609-212906.png

Blackout67

    Jun 9, 2024
  • 0
  • 0
Screenshot_20240609-212805.png

Blackout67

    Jun 9, 2024
  • 0
  • 0

New threads

Top