sundownz Pro Seller
Supporting Vendor
Had a friend of ours in the industry put these on their Amp Dyno to verify power since people have asked us about it.
All SAE amps meet or exceed ratings @ 1 % THD on the Dyno.
SAE-1000D v.2 :
* 1 ohm Dynamic test; works out similar to clamped results
SAE-600D :
* Certified; when I did a "clamp" test on the prototype it worked out similarly to the SAE-1000D Dynamic burst as I clamped around 50% over the certified figures.
SAE-50.4 :
* Per channel
* Per channel
* Bridged @ 4 ohms
All SAE amps meet or exceed ratings @ 1 % THD on the Dyno.
SAE-1000D v.2 :
* 1 ohm Dynamic test; works out similar to clamped results
SAE-600D :
* Certified; when I did a "clamp" test on the prototype it worked out similarly to the SAE-1000D Dynamic burst as I clamped around 50% over the certified figures.
SAE-50.4 :
* Per channel
* Per channel
* Bridged @ 4 ohms
