Octave 10+ year member
Member
This wasn't a fairy tale install thanks to the owner. So I won't be giving much details here. Surffice to say if you see him do not I repeat DO NOT do business with him. This is a warning.
The car - 2014 Lexus GS350
The equipment - Hertz HSX 165
- Hertz HCX 165
- JL Audio 12w3v3-4
- JL Audio XD 800/8v2
- JL Audio XD 1000/1v2
- Mosconi 4to6
- BatCap Model 800
A layer of Hush Mat Ultra was applied to the outside skin.
Then a layer was applied to the inside skin.
The molex plug in the door jam didn't have provisions to run speaker wire through it so I soldered onto the OEM door speaker wiring.
True to Octave fashion plexiglass mounting rings were fabbed up.
The Hertz HSX 165 woofer received a foam gasket and heat shrunk terminal leads.
The plexiglass mounting plate utilizes OEM mounting hardware.
The passenger door received the same treatment.
The car - 2014 Lexus GS350
The equipment - Hertz HSX 165
- Hertz HCX 165
- JL Audio 12w3v3-4
- JL Audio XD 800/8v2
- JL Audio XD 1000/1v2
- Mosconi 4to6
- BatCap Model 800
A layer of Hush Mat Ultra was applied to the outside skin.
Then a layer was applied to the inside skin.
The molex plug in the door jam didn't have provisions to run speaker wire through it so I soldered onto the OEM door speaker wiring.
True to Octave fashion plexiglass mounting rings were fabbed up.
The Hertz HSX 165 woofer received a foam gasket and heat shrunk terminal leads.
The plexiglass mounting plate utilizes OEM mounting hardware.
The passenger door received the same treatment.