2008 Tundra with stock stereo ...help!

i have an 07 one and i have looked into it. there is nothing right now for these trucks. to run an amp you can just use an inline converter. may i ask, how did you get the dash apart?

 
I will buy te line out converter... but I need to figure out which are the rear speaker wires on the 12 speaker JBL system!

To take th dash out...man it was a pain to figure out. THe bottom area where the cig lighter is comes out first. I stuck a plastic tool in their and torqued out that piece first and then the middle pulls out and then you have 4 bolts to take out the stereo. I put a few little dents in my dash trying to figure it out!!!

 
I figure I will tap in near the stock stereo but there are 30 wires leading from the deck. I have to figure out which are the rear speakers and tap into them. Just wish I could find a wiring diagram!

 
I went to BB to look at their converters and the installer told me to look into my JBL system as he says I may have a problem cuz of the stock amp??

Where would I put the converters? Near the stereo or after the stock amp?

 
When you say JBL crap did you mean the entire system? My JBL has 12 speakers and sounds pretty clean but I want more bass.

When you hard wired you still used the JBL speakers...?? I assume you traded out the head unit.....????

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

mannyahles

10+ year member
Senior VIP Member
Thread starter
mannyahles
Joined
Location
Carlsbad, Ca
Start date
Participants
Who Replied
Replies
7
Views
2,589
Last reply date
Last reply from
mannyahles
IMG_20260516_193114554_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0
IMG_20260516_192955471_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0

New threads

Top