2002 Ford Explorer Build Log

[kbkid 10+ year member]

Correct.

 

[Skip01 5,000+ posts]

How much power.....didnt read?

 

[kbkid 10+ year member]

Powered by an Orion 2500D.

 

[kbkid 10+ year member]

I also have a ton of sanding and filling left to do with the pillars, but its coming along.

 

[Low_e_Red 10+ year member]

Ya, those A-pillars need a hella lot of work. But for a first time it wont be bad.

 

[kbkid 10+ year member]

I finally got around to getting the a-pillars finished up the week before classes begin:

I also picked up a new battery for up front. The plan is to run dual batteries in the battery box in the engine compartment, but I’m running out of time before I head away so the second battery will have to wait.

 

[kbkid 10+ year member]

I got around to mounting the battery and making room for a second one. I forgot to take pictures, but I laid another 12 sq ft. of Second Skin in each door along with a deflex pad.

 

[mobeious 10+ year member]

what the hell were u aiming for with those tweets

 

[bigbangtheory 5,000+ posts]

Looks like the imaging is way off on the tweets, but hell of a job doing them! Look fantastic!

Box does look a little off for some reason, but overall the whole setup looks killer!

 

[86yota 10+ year member]

GREAT looking install and craftsmenship, I only hope my next install can look this good..

 

[kbkid 10+ year member]

The passenger side is pretty close pointed pretty close to my head, but the driver side got a little out of wack once I started glassing it.

I thought about flush mounting them, but then decided against it.

How should I have done them?

Thanks for the comments though.