2000 Camry Door panels (HELP)

[ArrizX 10+ year member]

Pull it and find out.

But remember, dont force anything. When you force it you break it.. If its ment to come out.. It will

 

[whosyodaddy74 10+ year member]

take it.. and pull it REALLY REALLY HARD! you might hear some shit snap.. but itll be off

 

[NoLimit 10+ year member]

take it.. and pull it REALLY REALLY HARD! you might hear some shit snap.. but itll be off

I take it she wasnt home?

I'll just wait a bit, I tried to pull that bar and it didn't come out

I'll go make some more flex videos //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

Thanks for everyones help //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[msujeepaholic 10+ year member]

Go to your local auto parts place and pick up a Haynes or Chiltons manual for your car. It is probably the most valuable tool you can have when working on a car.

 

[James Bang 5,000+ posts]

place a small thin flat head between the lock switch and trim (circled red) and pry upwards.

then place a thin flathead screwdriver in the pink-circled area, you'll have to go in much farther than step one w/ the flathead. the pry downwards. it's easier doing step 2 while pulling on the door lever.

this is assuming that this door is like my 96' camry.