2 subs on a mono

[99greengt 10+ year member]

can you run two subs on a mono amp? if so how do you wire them up?

Click to read more...

 

[SilverSquared 10+ year member]

Like any other amp. As long as you are at, or above the recommended ohm load of the amp.

What amp and subs?

 

[99greengt 10+ year member]

I was just wondering cuz i have a two chan. and my friend wants to do a system and i wasn't sure. if you hav a mono at 1000 watts is that for both or 500 each?

 

[99greengt 10+ year member]

does anybody know?

 

[outspoken 10+ year member]

it would be 500 each, but make sure your subs are wired at an ohm load that the amp is stable for...

 

[99greengt 10+ year member]

so if the amp can do 1000 watts at 2ohm than wire the subs at 2ohm and that would be 500 each?

 

[Stevefrech 10+ year member]

wat are the VC's on ur sub D2, D4?

 

[99greengt 10+ year member]

D4 unless I sell these and get two type Rs than I can get either.

 

[DBDRAGGUY 10+ year member]

can you run two subs on a mono amp? if so how do you wire them up?

post the model # on the amp and subs and someone can give a more detailed answer.

 

[BEAVER.989 10+ year member]

Two D4 subs can be wired to achieve a 1ohm load or a 4ohm load.

If the amp you own wants to be ran at 2oms, you will need either 2 D2 subs or 2 SVC 4ohm subs.

 

[99greengt 10+ year member]

they say if they are wired in parallel than it presents a 2ohm load.

 

[BEAVER.989 10+ year member]

they say if they are wired in parallel than it presents a 2ohm load.

Each.

Now parallel two of them and it's 1ohm.

 

[99greengt 10+ year member]

oh ok i get get it you wire the subs together thats what I wasn't sure about.

 

[99greengt 10+ year member]

thanks