2 DVC (please help)

[cory51191 10+ year member]

i have 2 DVC subs (300rms each) on a monoblock amp. whats the best way to wire them? i want to wire them so the amp is putting out 2ohms but if you have any recommendations please tell me. Thank you!

amp specs:

- 465 Watts RMS x 1 Channel @ 4 Ohms and 1% THD+N

- 750 Watts RMS x 1 Channel @ 2 Ohms and 1% THD+N

- 1150 Watts RMS x 1 Channel @ 1 Ohms and 1% THD+N

Click to read more...

 

[treadburner 10+ year member]

what vc are your subs?

 

[cory51191 10+ year member]

what vc are your subs?

dual voice coil. 4 ohms. 300rms.

i have 2 speakers and want the load to be 2ohms all together so each sub is getting 375rms

 

[thegreatestpenn 5,000+ posts]

parallel parallel to a 1ohm load

 

[cory51191 10+ year member]

parallel parallel to a 1ohm load

so if its wired for 1ohm the load will spread and become 2ohms @ each sub?

 

[treadburner 10+ year member]

just guessing you have a fusion amp?

no way for both subs to be at 2 ohm

either 1 or 4

id do 1 ohm and be easy on the gain

 

[pieper88 10+ year member]

yeah just run it at a 1 ohm load and turn the gain down. It's easier on your amp than running 2 ohms with the gain all the way up anyways.

 

[cory51191 10+ year member]

yeah just run it at a 1 ohm load and turn the gain down. It's easier on your amp than running 2 ohms with the gain all the way up anyways.

these are the dials on my amp

-1st dial: Bass Boost 0dB - 12dB

-2nd dial: LP: 40Hz - 250Hz

-3rd dial: SUBSONIC: 10Hz - 50Hz

-4th dial: LEVEL: 0.2 - 8v

what should i do with them? and i don't have a cd burner so does anyone know where to download a legit test tone track?

 

[cory51191 10+ year member]

just guessing you have a fusion amp?
no way for both subs to be at 2 ohm

either 1 or 4

id do 1 ohm and be easy on the gain

yes sir, fusion amp. and its great. i got it for 150

 

[treadburner 10+ year member]

i dont want to hear about your amp blowin or your subs blowing so make sure to have someone who knows how to set the amp do it for you

 

[cory51191 10+ year member]

i dont want to hear about your amp blowin or your subs blowing so make sure to have someone who knows how to set the amp do it for you

no1 i know even knows how to install a system. i'm a fast learner, if theres a link that will teach me how will someone send it please?