2 - 15" or 4-12" ??

[big scott]

wow nice..

i have been thinking how to make it removable.

and did not think about tracks, great idea. and ill do that.

ok i got it all now.

im sorry for all the questions i just want to make sure i get this right the first time as im not rich.

all the wood im going to need is going to cost me about a grand.

and man i was going to ask if i could use either the hds3 12" or the hdc3 ..

as im sure when i get it all done ill start getting some better subs. as its going to take me some time to get 6 of them.

i truly thank you very much.

if you need something that i can do for ya, let me know.

also if you want a few bucks for your time let me know.

 

[Papermaker85 5,000+ posts]

wow nice..i have been thinking how to make it removable.

and did not think about tracks, great idea. and ill do that.

ok i got it all now.

im sorry for all the questions i just want to make sure i get this right the first time as im not rich.

all the wood im going to need is going to cost me about a grand.

and man i was going to ask if i could use either the hds3 12" or the hdc3 ..

as im sure when i get it all done ill start getting some better subs. as its going to take me some time to get 6 of them.

i truly thank you very much.

if you need something that i can do for ya, let me know.

also if you want a few bucks for your time let me know.

naw man.. i just like to see people enjoy there systems.. you will need about 4 sheets for sure.. you need about 4 sheets lol.

2)31x38 is one sheet with a peace 34x42 you could use that left over for the sides you can use those for the port bracing and the port as well

2) 45x38 thats one sheet

2) 2 45x35 one sheet

2) 35x20 with a peace 56x42 thats enough for the port.. so you need 4 sheets..

so your looking at about 250 bucks. use regular *** wood glue and get you some of those deck mate screws the 2 1/2 inch is fine.. should run you about 12 for the screws and 2 big bottles of glue about 7 bucks.. think the rods are like 10 bucks a peace the nuts lock washers and washers should be about 10 bucks..

before you get deep into it let someone here double check it. it should be right @ 12 tuned to 35 after all displacements. and dont forget you need some weather stripping to put on the panels to seal the wall off thats about 5 bucks..