2 12" mtx 6000

OF course, man you must be new. i had 2 mtx 6000 10s in my car with 150w rms going to each in a sealed box and they thumped, and thumped good. i now have 4 mtx 6000 10s with 250w going to each one and well lets just say i set car alarms off all the time.

 
I have 1 10" MTX 6000, with 280 watts to it, and i am very pleased with it. I have it in a .65 cube and it handles all of my demands, mind you i have it in the back of a work van a half wall between it and the cabin. Great choice... although i will be uping to a 12 sometime soon, looking at the Adire Shiva //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif I will let yah know how it turns out. Take it easy

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Thanks buddy! Given me a lot to think about in terms of what to do; I've been watching YouTube videos on this stuff all day as well so I really...
4
779
You can wire those subs up @8 ohms if they are both SVC4 ohm subs,and that amp will run fine after being tuned properly...
4
1K
The 240 should be 2x40/ 2ch. rated at 11.9v. Should generate close to 50+ @14v rms. Only Rated @4 ohms bridged Mono.. Should be around 125 rms...
5
2K
In 1990: The MTX MTA 225 had a MSRP of 549.95 25x2 0.02% THD S/N 102 12x 8 1/2x 2 3/8 The MTX MTA 250 had a MSRP of 649.95 50x2 0.02% THD S/N...
5
2K

About this thread

sk8board4life86

10+ year member
Member
Thread starter
sk8board4life86
Joined
Location
gautier
Start date
Participants
Who Replied
Replies
3
Views
1,360
Last reply date
Last reply from
Matt
Screenshot_20240520_000638_Adobe Acrobat.jpg

Dylan27

    May 19, 2024
  • 0
  • 0
20240518_170822.jpg

Dylan27

    May 18, 2024
  • 0
  • 0

New threads

Top