2 10" L7's, Good amp?

[PapaGeno21 10+ year member]

Hey guys, I have been looking around at amps and I have come down to 2 differnt ones I want to do.

The 2 L7's are 10" and will be Dual 2 ohms in a ported box so I can run a 2 ohm load.

IM thinking either the

ZX1000.1 or the ZX1500.1

Which one would be better for my scenario. I knwo the 1000.1 pushes around 1200 so that would be perfect RMS on each sub, so I assumed that would be best.

Can I run only 4 Gauge on the 1000.1?

Im going to have a 2F cap also.

Thanks!

Click to read more...

 

[BassBallin]

zx1500.1

 

[PapaGeno21 10+ year member]

Can the 1500.1 run on 4 gauge wire? Or do I need the 1/0?

 

[dB-SPL 10+ year member]

Hey guys, I have been looking around at amps and I have come down to 2 differnt ones I want to do.
The 2 L7's are 10" and will be Dual 2 ohms in a ported box so I can run a 2 ohm load.

IM thinking either the

ZX1000.1 or the ZX1500.1

Which one would be better for my scenario. I knwo the 1000.1 pushes around 1200 so that would be perfect RMS on each sub, so I assumed that would be best.

Can I run only 4 Gauge on the 1000.1?

Im going to have a 2F cap also.

Thanks!

Save yourself some money.. Ditch the cap, buy the 4-Ohm L7's and wire them up for a 1-Ohm load. Drive 'em with a BXi-1206D or better yet, a KX1200.1 No need to spend the money on a ZX amp for 10" L7's. The money you saved from the cap can be used to get you some box materials, 1/0AWG for one run and the Big 3. //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

-Bill-