1994 Geo tracker build

[vonroretz 10+ year member]

Well Im new here and have never done anything like this before but to tell you about myself. I live in Atlanta I love all thins about car audio its my hobby love ect. I used to work with my uncle in a Shop called Cartunes Located near Roswell for you familar with the atl area. When I turned 16 my grandfather gave me a 1994 4x4 Geo tracker since that day Its been a never ending project.//content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

Ok well Im only 18 and I still live with my family I work at Delta airlines and we just replaced my transmission (lots of cash dropped)

But on too business, I just recently got some decent work done too my vehicle so I thought I would share it with you all on this fourm.

here is what it looks like as of now

here is the new alpine headuint i got 7 inch flip screen

My new amp(alpine mrp-m500) i love it so far just for the reason my old mtx amp over heated very commonly and this one barely gets warm on sustained rides.

note-i used a 8awg rockford kit with 12awg speaker wire also fosgate

my new mids/highs 5 1/4 fosgate punches sound good for only 50 bucks

note-i re did all my interior in desert camo

I also custom fabricated this because a tracker dosent have these speakers built in the doors, i removed the puny 4 inch ones from the rear and use these as my rears besides rears are useless, i also bought 4 inch fosgate punches for my front stage.

kinda off topic but i also put this cobra cb radio in also also i have a 8ft whip antenna attacted to my spare tire rack (people call my car mario cart)

also i have xm sat radio which i cleaned up a bit i used to have a hudge hole with wire everywhere but now i have a very clean look with taped up all my wires with plugs as well

note-that one wire just randomly sitting there is the charger for my tom tom

Click to read more...

 

[vonroretz 10+ year member]

yes i have some 12" inch kicker comps like the whole world does

but will soon be replaced with either pioneer 12 inch shallow mounts or kenwood excelon shallows

note- i put in dynamat extreme in my hatch and rear floor boards but didnt get to take any pictures because it was about to rain so i had to hurry i also bought a dynamat tag holder which helpe eliminate most tag rattleing

and finally under the hood i added red wire loom for all the spaghetti.i like it because it looks good and keeps the wires away from water

i also added a few sticker decals custom made ( i got them in daytona beach at the mall there)

the kc one came with my lights i bought thou

as you all may have noticed its a rag top so its not the most quite ride but the subs sound decent in it since i dynamatted most of the rear. my futre plans consist of

new kenwoods/pioneer subs

new re build box

4 channel amp for my mids/highs

might replace 4" speakers to comps(mb quart,cdt or focals)

viper remote start

and also nw vidsss soooonn asap

thanks for looking fynn

 

[vonroretz 10+ year member]

sorrry for the HUDGE pictures

 

[Varinabassing 10+ year member]

i like the deck but man that 8 ga is crap throw some at least 4ga in there

 

[vonroretz 10+ year member]

yea i know its tiny wire for that amp i will prob upgrade my power and ground to 4 soon

 

[bobbybdemented 10+ year member]

Don't get the shallow mount subs they **** ***... u will be dissopointed. I bought one pioneer 12 shollow mount sub and I hated it they are just crap

 

[vonroretz 10+ year member]

Whats wrong with them?

 

[Zip_Loc 10+ year member]

Not 1, but 2 GIGANTIC pictures of your liscense plate FTW.

MTX amp was probably heating up because you were feeding it 8 ga. wire.

 

[DB-Audio 10+ year member]

definitely upgrade the 8 ga to 4 ga i did that when i had my little 500.2 and it made a world of a difference

 

[kurrupt 10+ year member]

i had the same mini suv except mine was green and had 8 10" cvr's.

good luck on the build

 

[vonroretz 10+ year member]

thanks guys im getting paid so friday or monday i will order my new gear 4 channel new 4 inch speakers and speaker wire and stuff!

 

[dappa5 10+ year member]

Don't get the shallow mount subs they **** ***... u will be dissopointed. I bought one pioneer 12 shollow mount sub and I hated it they are just crap

lol thats cuz you bought a 100 shallow mount and you prob put it in a reg box lol most 12 thins only want .6 ft^3 give em to much and they sound like azz

plus spend some coin on memphis or Jl the 13.5 is the baddest thin mount EVER

 

[dappa5 10+ year member]

Not 1, but 2 GIGANTIC pictures of your liscense plate FTW.
MTX amp was probably heating up because you were feeding it 8 ga. wire.

RIGHT??!!?? lol if your chit was nicer I'd drive north and "GET YOUR CHIT" lol

g/l with rest of build

 

[vonroretz 10+ year member]

lol not really worth taking...i mean shit cause my tag is on here dont mean shit you couldnt find me if you wanted honestly

 

[Twisted_0912 10+ year member]

iz gonna find j00 car and steal all j00 audioz //content.invisioncic.com/y282845/emoticons/sneaky.gif.7189749b3a3f769e8815b47e8ae87f88.gif

Edit: too late