159 Bass Racer - SounDigital and Mach 5

[406er 10+ year member]

Those doors will be ripping pretty soon, have already seen it done on those vans. Buy more doors:veryhapp:

LOL, im not surprised, but where gonna see if we cant make the best of what we have for now, some how!

 

[murilo 10+ year member]

Was a nice show here in Winnipeg

Thanks to Saskatchewan folks that came.

A bit of info:

We didnt finish the car in time, so with the astro without any damping or decent doors (door panels allowing air to pass and etc) I decided to put only 8x 12" and one SD12kD.

I also forgot to seal the 2 openings on the extremes of the 6.5" steel tube (rounding of the wall), so now I realize that a lot of air actually escaped there, ehehehe.

At night we did mid 60's and in the morning I gained 1dB on the drivers door, but during the show I connected the subs at 2 ohms so we could play music all the day, was pretty funny. With the port like that the peak was 73Hz and the car was pretty loud lower than that on music (on ears), although we measure a diff of 10dB between 60 and 73Hz... I liked, the box is behaving exactly as designed.

That was good to bring more motivation, now we will finish the box and the car will still be legal for SS classes.

 

[murilo 10+ year member]

for you

 

[528hz 10+ year member]

Moors!

 

[fearof85 10+ year member]

Straight ****ing nasty!!!!

Drew

 

[kyleorsini 10+ year member]

cant wait to see the actual finished product guys, it was nice to see you all there yesterday, murilo this is making me want one of your amps now //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[DUMPED 10+ year member]

looking nice my friend... congrats on the progress

 

[406er 10+ year member]

cant wait to see the actual finished product guys, it was nice to see you all there yesterday, murilo this is making me want one of your amps now //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

kyle, you will need one hulluva electrical system to run them. i was running the SD3000 and it would cut out due to low voltage even with my truck running. what are your intensions bass race,dB drag or just want hard hitting mucic. its safe to say that switch from my MD3D to the SD3000 netted me about 3dB. i know you have a battery in the trunk already, but is it just a replacemnt type battery or is it a deep cycle etc...

 

[murilo 10+ year member]

looking nice my friend... congrats on the progress

Thanks George!

Where are more pics of yours?

 

[kyleorsini 10+ year member]

kyle, you will need one hulluva electrical system to run them. i was running the SD3000 and it would cut out due to low voltage even with my truck running. what are your intensions bass race,dB drag or just want hard hitting mucic. its safe to say that switch from my MD3D to the SD3000 netted me about 3dB. i know you have a battery in the trunk already, but is it just a replacemnt type battery or is it a deep cycle etc...

yes i know, id get a new bat up front a second or 3rd in the back and another spl my intentions 150. its going to be alot of work i know. im slowly getting it right starting with some dampening soon up front then midbass then re-working the elec.

 

[murilo 10+ year member]

yes i know, id get a new bat up front a second or 3rd in the back and another spl my intentions 150. its going to be alot of work i know. im slowly getting it right starting with some dampening soon up front then midbass then re-working the elec.

nice kyle, make it louder and louder, hehe.

 

[audioarsonal 10+ year member]

I will be getting a first hand look at some SD amps in a couple weeks!I am excited to see them in action and what the can do.

//content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[galacticmonkey 5,000+ posts]

What kind of numbers does it do at the lower frequencies? Like 30-45hz?

Thats insane though, mid 160s on 1 amp. And all those batteries for a single amplifier. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[kyleorsini 10+ year member]

thats the plan murilo, its not loud enough anymore =(

your products are so darn pricey tho, but you get what you pay for.

 

[murilo 10+ year member]

What kind of numbers does it do at the lower frequencies? Like 30-45hz?
Thats insane though, mid 160s on 1 amp. And all those batteries for a single amplifier. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

Hey man!

Almost nothing, the BP was designed to have a very narrow transfer function, from 60Hz to 73 was a 10dB jump.

After making the other wall this will change, hehe.

 

[devin1231 10+ year member]

crazy ass vids love how the astro badge fly off lol!

 

[galacticmonkey 5,000+ posts]

Hey man!
Almost nothing, the BP was designed to have a very narrow transfer function, from 60Hz to 73 was a 10dB jump.

After making the other wall this will change, hehe.

Oh, thats cool. Still sick numbers!

 

[rusty_armadillo 10+ year member]

solid build

 

[ngsm13 5,000+ posts]

Not a fan of high bass... make it do the same number @30hz //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif//content.invisioncic.com/y282845/emoticons/tongue.gif.6130eb82179565f6db8d26d6001dcd24.gif

nG

 

[_AnGeL_ 10+ year member]

wow, crazy build guys. whats going to be powering the beymas????