***** 1000/1

Fuk cabin mounting.Got pulled over by a cop while drinkin a beer, tossed it behind the pass seat, alpines brain went crazy for a few hours..... Drunk electronics.
well i mean there aren't many places to mount it in a truck... I didn't want it to look like shit by mounting them on the dash or headreast's or back of my *** //content.invisioncic.com/y282845/emoticons/fyi.gif.9f1f679348da7204ce960cfc74bca8e0.gif

 
When those resistors go, they will sometimes take mosfets with them!
Here you go to begin your testing **CLICK ME**
No, i don't think any resistors went either, I think the problem is just that corrosion.

Before repairs at a 2V@45Hz signal I was getting a maximum output of about 4.3v...

After repairs at the same signal, i'm getting 16.9

So cleaning of the corrosion and strengthening the weakened joints apears to be helping a little, only problem is that I'm having a hard time finding much more of that corrosion... //content.invisioncic.com/y282845/emoticons/confused.gif.e820e0216602db4765798ac39d28caa9.gif it's alot better, but obviously its a long way from perfect, it will probably never be perfect again:crying: i loved it sooo much...

 
No, i don't think any resistors went either, I think the problem is just that corrosion.
Before repairs at a 2V@45Hz signal I was getting a maximum output of about 4.3v...

After repairs at the same signal, i'm getting 16.9

So cleaning of the corrosion and strengthening the weakened joints apears to be helping a little, only problem is that I'm having a hard time finding much more of that corrosion... //content.invisioncic.com/y282845/emoticons/confused.gif.e820e0216602db4765798ac39d28caa9.gif it's alot better, but obviously its a long way from perfect, it will probably never be perfect again:crying: i loved it sooo much...
then stop hacking at it and send it somewhere before you really do damage. //content.invisioncic.com/y282845/emoticons/wow.gif.23d729408e9177caa2a0ed6a2ba6588e.gif

 
well i mean there aren't many places to mount it in a truck... I didn't want it to look like shit by mounting them on the dash or headreast's or back of my *** //content.invisioncic.com/y282845/emoticons/fyi.gif.9f1f679348da7204ce960cfc74bca8e0.gif
uh there ARE alot of places! YOU MAKE THOZE PLACES //content.invisioncic.com/y282845/emoticons/fyi.gif.9f1f679348da7204ce960cfc74bca8e0.gif i would never place an amp of ANY expense on the floor! why? one, things fall DOWN cuz of GRAVITY! two terrible ventilation! but man this sux! i would send it out instead of fvckn with it

 
Eh upon examination of the amp I see that the damage is in several other places also, some of them I can't really reach, i also think that some resistors must be fried, as the signal clears up after you reach a certain output. Based on the difference the repairs I attempted made, I'm pretty much gunna say it's F***ed,

It will be ok though, I have another one thats been installed for a while, this one has been sitting for a couple months till i got the chance to look at it (after finals)//content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif ...lucky this one was an ebay purchase of $300

I mainly got it because, how was i supposed to pass up a 1000/1 for 300$?

Haha well i sure as hell can't imagine another place to mount the amps without it looking like dog shit. certainly cant go under the back seat, at the time I would've gotten W7's back there, but there is literally NO more room...

i'm not going to mount the amps on the ceiling. The place they are now is PERFECT for them, the brain for the HU also has to be down there, that means no signal cables have to go more than like 2 feet. not to mention that the ventilation is perfect down there, there is alot of room under the seat, and they aren't on the floor they are on brackets that attach to the floor. so they are about an inch off the floor.

I guess i just have to take the chance that no more idiots spill drink's...

I mean they shouldn't have gotten hit, it was kinda a freak accident, he had one of those "big gulps" and when he was climbing into the truck he kinda tripped and dumped it in the car //content.invisioncic.com/y282845/emoticons/verymad.gif.3f39c5c2fd57527b671fad3efdfac756.gif what a stupid *****.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

cotjones

10+ year member
CarAudio.com Veteran
Thread starter
cotjones
Joined
Location
Wilmington, NC
Start date
Participants
Who Replied
Replies
50
Views
3,592
Last reply date
Last reply from
GAM3OVR
IMG_20260515_202650612_HDR.jpg

sherbanater

    May 15, 2026
  • 0
  • 0
IMG_20260515_202732887_HDR.jpg

sherbanater

    May 15, 2026
  • 0
  • 0

New threads

Top