k_schutte 10+ year member
CarAudio.com Veteran
I am seeing if there is any interest in trading my setup for a beefy 15". I have a pair of RE SE-x 10"s, box is 2.5ft^3 @ 34hz via single 6" aero. I can get dimensions if someone is interested, but it's like 20* so i don't feel like doing it right this second.
They've been getting 800~ rms clean power each. Box is well built, 3/4" MDF with a double front and flush mount. also has a nice little cosmetics piece on the side for the port. I have it setup as subs facing rear, port to the drivers side, bottom back corner. Box is also bed lined, not perfect but it looks good in the trunk!
The 15" needs to be able to be wired to 1ohm and handle at least 2kw. Don't really care what brand as long as it meets those requirements.
you can see pics in the build thread. http://www.caraudio.com/forums/car-audio-build-logs-cars-trucks-suvs/549314-my-lame-***-low-budget-cts-build-2.html
They've been getting 800~ rms clean power each. Box is well built, 3/4" MDF with a double front and flush mount. also has a nice little cosmetics piece on the side for the port. I have it setup as subs facing rear, port to the drivers side, bottom back corner. Box is also bed lined, not perfect but it looks good in the trunk!
The 15" needs to be able to be wired to 1ohm and handle at least 2kw. Don't really care what brand as long as it meets those requirements.
you can see pics in the build thread. http://www.caraudio.com/forums/car-audio-build-logs-cars-trucks-suvs/549314-my-lame-***-low-budget-cts-build-2.html