1 batt. 2500d

[SBLAZER]

thats y u have a HU that u can control both seperate. i have my gains on my 2500d almost maxed and i control everything thru my HU. it doesnt affect my frontstage at all, becuz the HU controls everything seperatly. so it doesnt affect the fronstage amp at all really,

and u'll be fine wit the 2500d on stock alt and a solid batt up front. i kno //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[Chriscivic 10+ year member]

thats y u have a HU that u can control both seperate. i have my gains on my 2500d almost maxed and i control everything thru my HU. it doesnt affect my frontstage at all, becuz the HU controls everything seperatly. so it doesnt affect the fronstage amp at all really,
and u'll be fine wit the 2500d on stock alt and a solid batt up front. i kno //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

I have an hu that does that also, but not everyone, he is just telling everyone to max out your gains, does not sound too smart to me. Just b/c he can build a good ported box, it does not mean he knows everything else about car audio.

 

[ilaydit 10+ year member]

well I was gonna replace my stock batt. with an optima red top, and get a second red top with the stock alt wich I believe is 120 amps, would that be fine

and I got my stinger 1/0 kit in today..woot woot

 

[tRiGgEr 5,000+ posts]

I have a 8004 and a 1200d. At full power my lights dimmed. You just can't run a true 2500 watts on a stock system. End of story.

 

[SBLAZER]

tru, but ive done it and havent had a prob. he will be fine, 0ga nice strong batt and that will hold u for awhile. dont expect full potential out of the amp, but it will be very nice to ya //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif @.5ohm no i dont recommend runnin it on stock elec @.5ohm becuz u can and may damage the amp.

 

[SBLAZER]

I have an hu that does that also, but not everyone, he is just telling everyone to max out your gains, does not sound too smart to me. Just b/c he can build a good ported box, it does not mean he knows everything else about car audio.

i dont think he was tellin anyone to max there gains. but it isnt gonna hurt anything if u kno wha u doin. im sure someone will be on here soon, complainin and askin for help about the setup, it happens all the time.

 

[Spkrman]

I have an hu that does that also, but not everyone, he is just telling everyone to max out your gains, does not sound too smart to me. Just b/c he can build a good ported box, it does not mean he knows everything else about car audio.

//content.invisioncic.com/y282845/emoticons/crying.gif.ec0ebefe590df0251476573bc49e46d8.gif :crying: //content.invisioncic.com/y282845/emoticons/crying.gif.ec0ebefe590df0251476573bc49e46d8.gif

I didn't say for the guy to max out the gains... its more of a don't be scared to turn em up if you need to. It was in context with trigger's post...

If you dont have noise issues, its fine... I burp with the amp at .5 on volume 25/sub level -3 out of 35 on the HU, 5v kenwood... for 1 ohm the sub level goes up to -1, for 2 ohm the sub level goes up to 0 and the volume to 27. That being with the gain maxed. What would happen if I turned the gain all the way down? I'd just have to turn the sub level/volume up... thats it. I can roll with the sub level on -10/-15 with max gain, or have it around 0 with the gain at .25/all the way down.. either way.

 

[Spkrman]

I have a 8004 and a 1200d. At full power my lights dimmed. You just can't run a true 2500 watts on a stock system. End of story.

With a decent battery and plenty of wire... sure you can. Its been done //content.invisioncic.com/y282845/emoticons/cool.gif.3bcaf8f141236c00f8044d07150e34f7.gif

Just need an effeciant amp, like an orion 2500d - lol.

 

[Chriscivic 10+ year member]

//content.invisioncic.com/y282845/emoticons/crying.gif.ec0ebefe590df0251476573bc49e46d8.gif :crying: //content.invisioncic.com/y282845/emoticons/crying.gif.ec0ebefe590df0251476573bc49e46d8.gif
I didn't say for the guy to max out the gains... its more of a don't be scared to turn em up if you need to. It was in context with trigger's post...

If you dont have noise issues, its fine... I burp with the amp at .5 on volume 25/sub level -3 out of 35 on the HU, 5v kenwood... for 1 ohm the sub level goes up to -1, for 2 ohm the sub level goes up to 0 and the volume to 27. That being with the gain maxed. What would happen if I turned the gain all the way down? I'd just have to turn the sub level/volume up... thats it. I can roll with the sub level on -10/-15 with max gain, or have it around 0 with the gain at .25/all the way down.. either way.

I understand what you are saying. my alpine has sub level 1-15 and i set my gains at sub level 10 so i can turn it up to 15 if a song is recorded lower or does not have as much bass. the max volume on my alpine is 35 and thats where my component amp is set to also. anyways i set my sub amp like i do to have a higher pre out voltage. nothing wrong with the way i do it or the way you do it. And for the thread starter, i will have my 2500d soon on my civic's 70 amp alt. so i will let you know how it goes

 

[ilaydit 10+ year member]

sweet, then I guess ill be running wires tomorrow and the MT will be going in

 

[Spkrman]

I understand what you are saying. my alpine has sub level 1-15 and i set my gains at sub level 10 so i can turn it up to 15 if a song is recorded lower or does not have as much bass. the max volume on my alpine is 35 and thats where my component amp is set to also. anyways i set my sub amp like i do to have a higher pre out voltage. nothing wrong with the way i do it or the way you do it. And for the thread starter, i will have my 2500d soon on my civic's 70 amp alt. so i will let you know how it goes

Yup... the sub level on the deck is a wonderful thing //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

Remote gains are also really sweet, analog = dail it in just right //content.invisioncic.com/y282845/emoticons/cool.gif.3bcaf8f141236c00f8044d07150e34f7.gif

 

[Raisedin305 5,000+ posts]

sweet, then I guess ill be running wires tomorrow and the MT will be going in

Let us know how it performs.