I WTB a 09 DC PAI 1000.1 or a DC 1.2K. Id perfer the pai 1000.1 over the DC 1.2k (just because the aluminum inserts look mad ****).
I have a 09 DC PAI 3000.1 that I could do a partial trade for one of the DC amps plus cash. Let mek know.
09 DC Audio PAI 3000.1 Mono Amp - Rare!! I was one of the lucky few to be able to snag one of these off my man Rusty. This amp is a straight BEAST. I ran it at .5 ohm daily and never had any trouble with it. there is a small knick in the bottom left of the top plate's paint but be sides that.. this thing is flawless.... 10/10 Mechanically and 9/10 Cosmetically. Comes with original box, bass knob and cord. Only getting rid of because I down graded subs to DC lvl2 8's to improve gas milage in my new ride.
Specs:
RMS power, 1 ohm mono - 3000W x 1CH
RMS power, 2 ohm mono - 1500W x 1CH
RMS power, 4 ohm mono - 750W x 1CH
RMS power, 2 ohm linked - 5400W x 1CH
Double Sided Through Hole Epoxy PCB
1 Ohm Stable Circuit
Daisy Chain Through Output RCA
Two Amp Linkable Function: Output Master And Input Slave
24db/Oct Variable Crossover
Multi Way Protection Circuitry (thermal/over current/speaker short/speaker dc protection)
RCA Line Input
Subsonic Filter
Variable Bass Boost
Variable Low Pass Filter
Variable Phase Shift
Zero Gauge Power Supply Connectors
Tested Voltage & THD: 14.4V & Less Than 1% THD
Operating Voltage: DC 10V-16V Power Input
Wired Remote Controller
I have a 09 DC PAI 3000.1 that I could do a partial trade for one of the DC amps plus cash. Let mek know.
09 DC Audio PAI 3000.1 Mono Amp - Rare!! I was one of the lucky few to be able to snag one of these off my man Rusty. This amp is a straight BEAST. I ran it at .5 ohm daily and never had any trouble with it. there is a small knick in the bottom left of the top plate's paint but be sides that.. this thing is flawless.... 10/10 Mechanically and 9/10 Cosmetically. Comes with original box, bass knob and cord. Only getting rid of because I down graded subs to DC lvl2 8's to improve gas milage in my new ride.
Specs:
RMS power, 1 ohm mono - 3000W x 1CH
RMS power, 2 ohm mono - 1500W x 1CH
RMS power, 4 ohm mono - 750W x 1CH
RMS power, 2 ohm linked - 5400W x 1CH
Double Sided Through Hole Epoxy PCB
1 Ohm Stable Circuit
Daisy Chain Through Output RCA
Two Amp Linkable Function: Output Master And Input Slave
24db/Oct Variable Crossover
Multi Way Protection Circuitry (thermal/over current/speaker short/speaker dc protection)
RCA Line Input
Subsonic Filter
Variable Bass Boost
Variable Low Pass Filter
Variable Phase Shift
Zero Gauge Power Supply Connectors
Tested Voltage & THD: 14.4V & Less Than 1% THD
Operating Voltage: DC 10V-16V Power Input
Wired Remote Controller
