'07 Soltice GXP

i cut into the rear fire wall and put a 10" behind each side.. deck isnt too bad.. just remove the cluster bezel.put the amps in the very back.
That's where I was thinking for the amps, too...

I didn't think that there was room behind the drivers seat, I'll have to check it out.

What did you do to enclose your subs?

 
cut the entire section out and fiberglassed around all the supports back there.

got about 1.25cuft each.

in the rear i removed all the fact. panels in the very back by the taillights, and made an amprack that sat back there.

the car is off to get its ls6 transplant. woot

 
my bro was either getting the 06 or a 06 350z lets just say he was feeling the z a tad bit more. I love the z. but then again the gxp just came out and wasnt available in 06. It has more power and upgrades now, but i still like z better

Mike

 
my bro was either getting the 06 or a 06 350z lets just say he was feeling the z a tad bit more. I love the z. but then again the gxp just came out and wasnt available in 06. It has more power and upgrades now, but i still like z better
Mike
I was looking at the Z also, but it would have cost me about $8-10K more. As it is, I'm spending about $30K on the GXP.

If anyone else is looking at them, don't buy from the showroom floor. The dealer marks them up anywhere from $3-9K over the MSRP, bastards. The only problem with ordering from the factory is that each dealer only gets 1 per month, so you go on a waiting list. Mine will get ordered in November and then it takes 6-8 weeks for delivery. I'm getting it for the MSRP though...

 
cut the entire section out and fiberglassed around all the supports back there.got about 1.25cuft each.

in the rear i removed all the fact. panels in the very back by the taillights, and made an amprack that sat back there.

the car is off to get its ls6 transplant. woot
I'm looking at using a 10W7 with a 500/1 powering it. I've seen the sub "cut-out/grill" behind the passenger seat in the '07, was there one there in the '06? If so, what was there to house the sub?

I'm kind of nervous about tearing up a brand new car. Running wires and mounting is one thing, Cutting a 10" hole in the fire wall is another. Not to mention that I've never done any real glass-work to speak of...

Also, what size are the door speakers?

Thanks for all the help.....

 
have fun driving that rocket, thats a roadster how it should be.
I took a base model '07 for a ride a few weeks ago and it had some get-up-and-go about it, so I cant wait til I put my foot down and spin the up turbo on mine...

Of course, with my luck, It'll blizzard the day it comes in and the roads wont be clear for 3 months or so... I should be good with tire chains, right???//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 
eh, chains blow. with a good set of studded tires you can get AMAZING traction on ice. I the crew from one of the bond movies talking about how they had to remove some of the studs on the yokawhatthehellever tires that we're made for the aston martin because they were getting just as good traction as they would on a normal road.

 
eh, chains blow. with a good set of studded tires you can get AMAZING traction on ice. I the crew from one of the bond movies talking about how they had to remove some of the studs on the yokawhatthehellever tires that we're made for the aston martin because they were getting just as good traction as they would on a normal road.
Cool, I can see me now, driving through wind and snow and ice, pedal on the floor, music blaring...

All the while, freezing my *** off because I refuse to put the top up!!!

 
Cool, I can see me now, driving through wind and snow and ice, pedal on the floor, music blaring...
All the while, freezing my *** off because I refuse to put the top up!!!


hahah that is how u have to do it tho....new cars are meant to use every feature the moment u get it lol

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

GO-N DEF

10+ year member
FNG
Thread starter
GO-N DEF
Joined
Location
Pohang, Korea
Start date
Participants
Who Replied
Replies
50
Views
2,548
Last reply date
Last reply from
GO-N DEF
IMG_20260516_193114554_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0
IMG_20260516_192955471_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0

New threads

Top