connection

So had a question about these I know how to put the wire through from the amp on (purple side) you just unscrew drop the wire in the hole and screw tight but my question was how do you connect the wire on the rear from the subs (blue) could I just solder it on there?

I have a 2009 Pioneer AVIC Z110BT interfacing it w/ the RP4GM11 adaptor in my 05Chevy Express 3500 RV van for chimes/key still in ignition/parking brake ect. 1.where is the AVICs yellow mute wire connected to? the majority of the AVIC is voice operated. I've just completed most of the wiring...

Ok guys got a question so I have a Crescendo 2000d bass cleff. It has rca input and next to it a out also a strap out rca. My goal is too get another class d amp to work and don't know if that rca out will be OK to run to a input on another class D amp

Hey all, I’ve recently installed an Alpine CDA-7846J paired with an MDA-5050, and also wired in an FM modulator. Everything was working fine yesterday (see video: ), but now everything is working fine other than my speakers. The issue I’m facing is that I have to unplug, and then re-plug in...

my music in my truck cuts in and out whenever I hit a bump. I have a aftermarket radio and after market speakers I have spliced into the original wire so I am not using a harness. I've run new speaker wire from my head unit to my left front thinking it would fix it and it did but it still cuts...

I have a DDX5707S head unit on a 2014 Nissan altima that is having an issue with the backup camera. When I first turn on my car and put it in reverse before the head unit is booted, it shows the camera video feed. However, if the head unit boots up and I turn it to reverse, the camera video feed...

Hello! So the rule goes you should not ground to a painted surface... once you have cleaned the surface free of any paint, and made a connection. Can you then paint over your ground to prevent rust?