Recent content by z31joe

Do you get sound from your subs? If your speakers are connected to the deck and they're not getting any sound then it's likely that the internal amp of the deck is blown. Which means you may need an external amp to power your speakers or get a new deck. If you're lucky you're deck may have an...

which kappa are these?? Maybe they need to "break in" some more. Move the tweeters to another location and mount them off axis. EQ down at around 1k-6khz. Also try swapping out the kappa tweeters with the reference tweeters. If nothing else works, sell them and get something else.

what's the budget?? Cabin gain can really effect the FR of a sub, so look into getting an EQ as well. Tuning and install is just as important as what sub your going to use. my top picks(never actually heard these but i dirty myself just thinking about em) Aura NS12-7 series or higher (or MR...

So your want to use the HU's internal amp instead of an external amp? you might want to check out JVC Arsenal KD-SHX850, it's got 35Wrms and 2 way + sub active crossover. it also comes with an external DC/DC converter to keep constant power to the HU. it should be decent for the money, i got...

Just because the sub is rated at 1000W doesn't mean you have to run it with 1000W.

yes, that dc/dc converter needs to be grounded. there's a picture or drawing that shows the converter being screwed down with an arrow pointing to a ground symbol. its on page 3(part A) in the installation manual. like horse man said that converter will make create some EMI(electromagnetic...

How about 2 of these: http://www.madisound.com/catalog/product_info.php?manufacturers_id=121&products_id=79? $109 each.

10in x 5in x 3in.... Fb= 32.85hz i got that using bassbox 6 pro and the t/s of dual 1 fi q18. i dont know if thats right cuz im still learning how to use the program.

Yea, it will work. You can wire the P3SD210 at 4 and the P3SD410 at 2 and run them in series=6ohm. or P3SD210 at 1 and the P3SD410 at 2 and run them in series for 3ohm load. or P3SD210@4 and the P3SD410@8 and run them in parallel=2.667. The problem is the sub with the most impedance will be...