Recent content by yoshida_Kinshi

holly ****ing yolu it worked thanks alot man ^_^ you really saved my *** from tearing all my hair out

alright thanks, both of those wires are supposed to be 12v right?

how do i connect the power wire into the harness? just shove the copper into it?

er just tested the constant power wire and its only showing 2.4v but the ignotion wire is showing 11.9v any ideas how or why i can fix the low voltage on the constant power wire?

so i finished splicing everything together and put the harness into the car/deck but i have no power....i redid all the connection and connected it again yet no power....my voltmeter is reading that theres like 8.9v at the car harness so there is power going to the cd player....not sure what the...

Whenever i am idling at a stop light or just stopped and there alot of bass hittin g the idle seems to drop while that beat is on and then comes back up when it stops. It seems to me that maybe it is causing too much of a strain of my electrical system. I have a 2 farad capacitor leading to a...

am i suppose to cut it and splice it into my new deck somehow? Does this antenna wire differ from the one on the wiring harness?

I currently have an older jensen deck that starting to die, so i bought a new deck and am trying to install it. Everything I see looks similar to what i'm putting in except for this one wire that is coming out of the existing deck and leads into the firewall. Any ideas as to what it is, or what...

cool thanks for the advice guys

okay and you'd recommend those two over the kenwood then yea?

theres this kenwood amp i see thats 1200w rms x1 channel at 2 ohms. in price range. So if I split it among the two subs it should be about 600wrms per sub yea?

not really on a budget looking to spend around 300 on the amp. Most of the type R i've seen are 4ohm dvc.

I am looking to get two alpine type r 12's and i was wondering if you guys had any suggestions for the amp(2) to power them.