Recent content by Xowner

I had it looked at this weekend and the installers checked everything. They re-did the ground and checked all the wiring except the sub internally in the box. They were had no idea what was making this all happen.

The amp just started to have these problems. Beside the two fuses in the amp it-self there is one on the power wire going to the battery.

I have a DVC 6ohm sub wired to 3ohm and I'm not sure of the circuit breaker. Where would the circuit breaker be?

The amp never gets hot but I'll check the ground. Thanks

My 600.1 was installed recently and I have a problem every time I turn the HU on. Simply put: my amp light comes on yet I only get 15sec. of my sub playing before it stops. When I turn the HU off the on again I get the same result. When the sub stops playing the amp light remain the...

I recently had a 600.1 installed and it worked fine for about 2 day's before THE problem. When I first turn the car on the amp comes on and play's for about 15 sec. then the bass stops. The amp light remains on and no additioinal lights come on from the amp beside the power light. When this...

Where can I find WINISD or other box building programs?

Does the box size matter if you're looking for SQ. I've heard that sealed is generally good for SQ but I see a lot of people talking about ported all the time. A smaller sealed box versus a larger ported box pro's and con's?

I mean the speaker is completly inside a sealed box and is facing down thus firing down. Some home subs are like this but not many. You can go to Crutchfield site to see them.

My HU has front, rear, and sub preouts. Which would I use? Remember, I'm adding a sub amp and will add a mids/highs amp in the future. Thanks.

I got it installed at a local car audio shop that is pretty well known ( Rudy's Car Audio ). The installer pointed that Nissan's have this problem due to the stereo's that they put in them. My factory HU was a 6-disc indash changer that had steering wheel controls. I knew that the steering...

I recently bought a Alum12Q and a 600.1 to push it in my Xterra. What size box do I need for the best SQ? It would be nice for the box to not exceed 13.5in in height so I could use the rear pull out cover to cover the box so the glancers that walk by can't see what I got. No real restrictions...

I just had a new Sony headunit installed in my Nissan Xterra and there's a slight probelm. The volume only goes half-way before maxing out. The installer said I need some special " wire " or connection piece ($60) to fix it and this problem is due to the make of the car being Nissan. Any...