Recent content by nativefx

I was interested in taking a look at the Audiofrog option, but it says this comes in a dual 2 ohm configuration which means it has to be either ran at 1 ohm or 4 ohm, and given my limited space and using a 5 channel amp I don't think it will be an option here. thanks

If the 10w6 is the best option I'm all for using it. I just wanted to see if there were any other options to consider, and not just due to being cheaper. I'd rather get the best performing sub for what my limitations are. thanks!

Okay so I got a hold of The Shop LLC who built the box and based it around the JL 10w6v3 as mentioned before. He said the box will give me a NET 0.6 cu/ft of volume after removing the displacement of the driver (.078 according to JL). This is a little larger than the minimum 0.55 JL recommends...

Okay, I'm trying to see if I have any other/better sub options besides the JL 10w6v3 for my '69 Firebird project. I have some time to decide, but I already have a custom box to fit the very limited space I have and the company that designed the box for first gen camaro's/firebird's say the JL...

**** it, second one I missed out on.

I have the Zapco ST5X amp and the sound is great. Haven't had anything recently to compare it with, but I may have something soon for my other vehicle. I'll probably hook it up in place of the Zapco just to see if I hear a difference.

I'm assuming those bigger 5 channel amps are if they are running 1 ohm? I have to run 2 ohm as they are SVC subs.

Yeah I already have the subs cause they were supposed to be going into my 69 firebird project car, but space is a premium due to the air ride i decided i wanted. I'm using these since they've been sitting in their boxes for over a year and I already have a shallow 12" in my Tundra DC.

I started a post before asking about whether to use an Alpine 5 channel or PPI 4 channel and PPI sub amp and got some good responses. Obviously I can get more power with the 2 PPI's. What I'm really trying to find out is if anyone knows whether 500 watts feeding these 2 subs would be under...

Are these still available? Trying to figure out how long I'll need to run to amps in the trunk.

Do you know what the sub channel puts out at 2ohm? I've got 2 single voice coil 4ohm subs, so I'll be running a 2 ohm load for those. Heard good things about DD audio so I'd be interested to get more input about them.

Any recommendations on other 5 channel amps to consider? Something within roughly the same budget? As for the amount of bass, I guess I just wasn't sure how well the 500w from the Alpine would push the 2 JL 10w3's? I don't want the bass to completely overpower the fronts, but I just wasn't...

Okay, I'm trying to put a budget setup in my commuter car which is a 2015 Toyato Camry. I already have 2 sets of Hertz DSK 165.3 for the fronts and rear. I know most don't like/want rear fill but with passengers in the car normally I want sound back there as well. I also already have 2 JL...

I'm kind of in the same boat as far as wanting to keep my stock hu and add speakers, amp and subs. I saw the Audison Bit 10 was recommended and I will look into that, but I was recommended to use the JL Audio Fix 86 from a guy I bought audio equipment from in the past. Can anyone tell me the...

I'll take it for $100 shipped. PM'd you.