Recent content by jackson

Thanks for the help!!!!

how exactly is power divided to the subs if running 2 subs parallel into one channel and 2 subs parallel into the other channel. for example whith my setup of a 500 watt amp (250 per channel) is 125 watts going to each sub on that channel.guess what I am asking is power of a channel divided...

sub specs say 1.5 cuft per sub I have 1.7 per sub. The amp is rated at 500 watts( 250 x 2) I do not know the rms usually about half though so I would guess about 125rms per channel.maybe 150 since I am at 2ohm. The subs say 450 watts each probably 200 rms.I am considering a 800 to 1000 watt good...

Makes sense . If I understood the other threads on amp gains correctly,they sre used to match the output voltage of your h.u. is that right? Also when I turn the gain down I do not have near the bass from my subs. Is this because the amp is to small for what I am using it for.

Thanks, I had forgotten about those.I have the gain turned all the way up because I am pushing 4 12's with a little 500 watt majestic amp w/ 2ohm load per channel. do I still have a chance of blowing my subs?????

I am running factory speakers for now and need to remove low frequency from them because at high volume they distort. Have bass all the way down on pioneer h.u. now and amp gain all the way up for my subs. Should I go with cross-over and amp or just put in a dash mount E.Q. OR would I be better...

I have a 2002 Xtreme only has speakers in dash and doors none in ext. cab.

THINK THAT WILL SOUND GREAT ! I HAD TO BUILD MINE UP TO THE BACK GLASS FOR AIRSPACE AND 4 12'S IS A TIGHT FIT IN AN EXTREME TRUCK.

what size are the factory door and dash speakers?I want to replace these but would like to take off the door panels only once.

First I WOULD LOOK AT THE SPEC. SHEET FOR YOUR SUBS. AND DETERMINE WHAT AIRSPACE THEY REQUIRE. THEN MAKE YOUR MEASUREMENTS AND GO. (CUFT. IS LxWxH/1728) :) EX: 12x12x12/1728 =1 cuft ( internal dimensions)

Thanks.

can pioneer impp 12's be used ported.always been told they are for sealed enclosures only. If they can , the specs call for 1.5 cuft per sub, what size internal dimensions would I have and port size? keep in mind I want LOW,LOW BASS around high 30's low 40's. My sealed box sounds good but I...

Which is better box with some type of "stuffing" inside or without anything inside? :confused: :confused: :D :D

THANKS SOUNDS EASY ENOUGH..........

I also have a problem with the cab of my truck. I have my subs facing up and angled so they fire off the back glass.( I have 4-12's in a ext cab Extreme).Anyway the top of the cab is flexing and echoing to make the subs sound like they are distorting, listening from the outside of truck. From...