Recent content by green95hoe

Ya, I figured that was the best way to do it. I have heard horror stories about them not sealing right but I guess as long as I use some liquid nails at the seam and on both face sof the MDF ill be good to go. I was even thinking abotu using some 1/4x1-1/2" steel plate on both sides instead of...

So ive been going through some threads and gettin some ideas. I did a nice little sketch for you guys. The box has a divider and im looking to add a 12"x12" window on each side above the sub. Which would you run for my setup. Ported Box and 2 Resonant Engineering SX12's tunes to 32Hz

Man, I should be shot for not getting in on that group buy. I was ready to lock in 2 SX 12's and a component set but im having second thoughts now. Guess I became a member too late

Thanx again for the responses. I suppose if I go SX then ill have to spend a little more off the bat just to get the 1ohm coils. Man, I wish my box thread would get these responses. Its pretty much the only thing I havent been able to figure out...

K, ive been playin around with some stuff and ive got this far, can anyone tell me if im heading in the right direction. Box outside 13.5x48x15.5 .75 MDF displacement is .16 per sub (so .32) desired freq = 32hz gross vol = 4.201 net vol = 3.785 Port Length 19.95" Port Size 3x12" RE...

Sorry about that. My bad. It was late and I was frustrated displacement = .16 cuft ~Brad

Nights and nights of this and I cant do it anymore. Ive been messin with the sub enclosure programs and they are just frustrating me more than anything else. Please for the love of god end my pain. Dims: 13.5"h x 48"w x 15.5"d Two RE SX 12's (at extremeties of box) Single Square port in...

Ya, what would you recommend I tune it at. I figured 32hz as thats what RE suggests

Nevermind guys, I figured it out. Just had to do some reading

Thanx Jimmy, that is EXACTLY what I needed to hear. All I need to do now is get my enclosure specs squared away then I make my final decision based on what I want to spend ~Brad

Id say its possible. I have been up that way before but not that frequently. right now im leaning towards the SX's because I know they will perform with my amp and the price is better plus they seem to be more geared as a better sub for a daily driver. The cost difference helps too and yes the...

Yep, exactly right. I already figured I was going to need to get 1ohm coils and run each sub in series and then parralel them together. I have seen people familiar with my amp put it down considerably though which is why im concerned. ~Brad

SE = 2 XXX = 2. Want to be sure my amp isnt going to underpower two of them though ~Brad

SX = 2 XXX = 1 ~Brad

First thing to move was a ride on lawnmower at 7, then the farm tractor (1947 Model A) at 9 and shortly later that same year a 1952 International Harvester Pickup truck 3 speed on teh farm. By 12 I was pimpin my parents griswold station wagon round the field and eventually started riding my...