Recent content by Fuzion64

Bass issue solved: Sub was blown and for some reason the iphone was muted when rca's were plugged up. If you connect your iphone to a pioneer deck don't forget to turn back up your volume before you ever turn on usb/bt. The iphone does not automatically turn back up the iphone audio when you...

The sub has a scratchy sound when I check it on a 9v, but it doesn't move at all reguardless of polarity. This is when I put the silver wire on the biggest connector and the copper wire on the smallest connector on the 9v I think the reason it blew or recieved the damage was the fact I had the...

Long story short had my gain set running a test tone of 50Hz 0db When out of nowhere I heard a 1 hz - 1khz sine wave test start from youtube without being selected due to the annoying youtube autoplay feature being turned on At this point my volume was at 85% since I was alternating between...

Setup: Pioneer 6800BS head unit (50x4 RMS) Pioneer AS 6.5's in front doors Kenwood 9106D Amp (500w RMS@ 4 Ohms | 2000w Peak @ 4 ohms) Memphis Audio SRX 12" shallow mount sub 4 ohms (250w RMS | 500w Peak) in a Prefab box with 0.65 Cuft of airspace for shallow mount How do I properly configure...

Help me create a new car audio setup for my dodge ram. I listen to 80% of rap and 10% of rock and 10% of pop. I like deep hard hitting bass that really slams. I primarily listen to my current Pioneer X6800BT at a volume of 30 or less out of 62 My bass is set at a quarter over half on the...

Took my truck into a car audio shop to have a amplifier placed on all the mids and highs. Mids and highs sound amazing, but the subwoofer no longer hits. It's getting power and the subwoofer is vibrating as if you were doing the hertz test on it for the frequency test when tuning it but it...

I never thought about this, but you are right. I am used to hard slamming bass when playing my music whether its from a stereo setup, a boom box, a surround sound system, and so on. The flat frequency does not actually sound good to me. Which is why I asked about bass boost. I also was unaware...

I had one more question concerning bass boost and gain. Now I know you are not supposed to use bass boost, but with the gain at 28.0v giving off 800w The bass is just weak until I add the bass boost back in, but I am afraid to now since people say bass boost is bad. There is a thump, but no...

When testing to set it with a multimeter do you use vdc 200 or vac 200 voltage? some youtube videos say vdc and some say vac so I want to know which one is correct when dealing with car audio.

kenwood KAC-9106D. It has 120Amp of fuses and I believe the actual rms is 900w last time it was checked, but I have reconfigured it since then.

I know this is a noob question, but I have two 12" Kicker Comp VT's rated at 400RMS/800 peak each Is it safe to set my gain for 800w given the fact I have two subwoofers or would I risk blowing out the subwoofers eventhough the power should divide among the two? Can I actually give 800w...