Recent content by buick203

thanks for the info this is my first enclosure I build for an 18   ---------- Post added at 05:14 PM ---------- Previous post was at 05:13 PM ----------   no I was gonna buy them new

that's what I was thinking. but from your experience is that to little of space for those subs specifically?   ---------- Post added at 03:29 PM ---------- Previous post was at 03:28 PM ----------   that's what I was thinking. but from your experience is that to little of space for those...

hello guys I'm thinking about getting 2 Fi BL18s. the thing is that I only have about 9.8cuft for both subs available I already took into consideration the port and sub displacement. I'm gonna be running them at 3000w and I came up with an enclosure of 9.8cuft before displacements tuned at 44hz...

so every time I use torres it never tells me the port cut measurements but it gives me everything else. it just says to complex to display. can someone help me please

Ok thank you very much man i appreciate your help

Ok do you recommend making it bigger also or leave it that size?

i tried that but then my tuning frequency changes by a lot like 5hz

3.5" port width, 11.5 port height and 31.5" port length

my bad I don't think it was very clear but its 1.8 for both. is that still too small? skar says .8-1cuft per sub that's why I went with .9 lol

im designing an enclosure for 2 skar zvx8 using winisd. I entered the info into torres calculator and I am getting 21.76 port area per foot. the size of the enclosure before displacements is .9cuft per sub like the manufacturer recommends it. I was told that the port area per foot should stay...

anybody have any experience with the zvx8 and in what size ported enclosure it sounds best?

so to get the size dimensions for the second port is it interior height by (total port length - port #1 length - port width - 1.5) or interior height by (total port length - port #1 length - (port width - 1.5)) ex. 1. 26.6-12.5-4-1.5=8.6 ex. 2. 26.6-12.5-(4-1.5)=11.6 when I over think...

did you come up with that just from experience or according to the manufacturer?

but when exactly do I know when the enclosure is to big? does the system tell me or is there something I should know when designing it

alpine type r 12" running it at 1200wrms for example