Recent content by 4Fifteens

The ap would be a tighter fit yea but I have a big trunk area so I'm not too worried. The hifonics costs $30 more so I wanted to know if that $30 is worth it lol

I'm looking for a good cheap 2000 watt amp and I see these two amps have pretty good reviews. I'm pushing 4 old school planet audio z-15's in a ported box and they are rated 400w rms each. They don't take much power to move either. I was wondering which amp would be better for me. Thanks for any...

Everything is set on the HU and the subs work because when the amp is powered on you can feel them thump when you move around the output wires when they're loose.

Ok so about a month ago my bass cut out while I was listening to music and I never had the time to work on it until today. So my amp turns on, but doesn't have any output. I've tried using the other rca wires that run to the door speakers amp on the bass amp but the amp still doesn't have any...

Ok so today I was playing around with my system and I was testing different frequencies with an app on my phone (tone generator). I started at high frequency waved then worked my way down to about 150hz and then my subs made a pop noise and they just stopped, so I go to in the trunk and look at...

Ok thanks I was just making sure I did everything right. I'm going to put some better mids and highs in soon so that should help out

It's just the sound of the high bass notes overpower my mids and highs and I hear mostly high bass notes

I was afraid someone would say I needed a new box lol. It actually hits hard when I turn up the volume a good bit but at around 10%-15% volume I hear it more than I feel it. It's actually a pretty big ported box. I'm running 4 planet audio z15's on a planet audio tt2250d. With 10g knukonceptz...

I don't know the box specs cause it was built like 10 years ago and I bought it from someone. And yea the gain is all the way down. I can turn it up but when I play at low volume I can most "hear" the bass instead of feeling it. I was wondering if there's a way I can change that with a little...

So today I tuned my bass amp. Gain and bass boost is all the way down and lpf is about 50-80hz. I'm running 4 15's on 2250 watts and I mostly hear the bass rather than feel it! Someone help

Thanks!!

So I'm no expert on car audio but yesterday I installed my 4 15" planet audio z15 on a planet audio tt2250d and I need help with the tuning. My bass boost on my amp is set about half way and when I turn the volume on the deck to about 10% the subs just SLAM and I hear NO mids and highs...

Thanks guys I used the spray and hopefully it will hold up

Do you think adhesive spray will work? It's good **** that I have

Well I have some DuPont residential & commercial adhesive spray.think that is safe to use? Also remember I have a carbon fiber cone I don't think I can sand it without damaging it