Recent content by 2006xplorXLT

Hi all, I am putting 2x 15's (200w RMS each) in an enclosure and I want to make sure I am not limiting myself with wire gauge. I have 2x15's hooked to a 400w RMS amp. Would 16-gauge wire work or do I need to go bigger or double up the 16-gauge wire? Thanks!

Hi all, I am mounting two 15s in a sealed box I've constructed. I forsee that I will need to remove the subs several times (in order to add filler, replace subs, etc, etc) and I want to somehow mount the subs so that I can repeatedly screw and unscrew them. I dont want to have to redrill new...

That RE Enclosure Calculator site is nice, but it seems to only give accurate measurements for ported/vented boxes, not sealed boxes? I enter 0 for all the port info it'd let me and I still get measurements like: Right Plate: 8.5 x 16.5 x 8.5 x 16.5 Left Plate: 9.25 x 16.5 x 9.25 x 16.5 This...

Hi all, So after much deliberation I decided since this is my first box to time/expense/difficultly is a factor, I will just build a sealed box. I have 2 15" Rockford Fosgate P1S415's and a mono amp. I am going to bridge both of these subs onto the amp at 400w. (don't second guess this, this...

Hi everyone, Today I bought 2 Rockford Fosgate P1S415 Punch Stage 1 15" 4-ohm subwoofers. I am trying to find a box for them. The recommended cubic volume for each is 2.66 FT^3. The cut-out hole diameter on these subs is 13 7/8 inches, and the mounting flange width is 15 1/4 inches. Can anyone...