Current events discussion

You are confidently incorrect, and defending your errors with all you have, which is nothing.
We're talking electronics and electronic circuits. Car stereo systems.

Wires are used in electronics, and in electronic circuits.
Those wires are not bridged, they are connected. They are spliced. They are touching each other directly. There is no "bridge "between them.The solder is not a "bridge". It could be silicone, it could be heat shrink tubing. It could be JB Weld or cyano.
In high voltage circuits, soldering would not even be code. They should be twisted together and wire-nuts put on them.

Go back to school. Learn the basics before you attempt more complex things.

View attachment 63519
Is it safe to say that no matter what anyone post you will deny it no matter how factual it is and claim the other person is wrong?
 
I've only been on the forum since 2021.
Yet another example of you making false claims you can't support.
Yes, on this forum.
Here's one of the swappable ports from the land tank. Try not to drool.
View attachment 63518
OMG!!! WOOD, SCREWS!!!! A MIDDLE FINGER!!!!!
STILL waiting for your proof that bones do not have nerves in them.
I know.
STILL waiting for you to prove with a schematic that your mono Rockford amp has multiple outputs.
No schematic was needed. They are visible on the exterior of the amp. :)
STILL waiting for you to prove your claim that ****** identity is determined by the *** organs.
Prove ****** Identity isn't a human construct.
STILL waiting for you to prove your claim that vaccinating more than 99% but less than 100% of a population is not possible.
I said person, not population.
STILL waiting for you to prove your claim that Trump built 571 MILES of wall.
Wasn't my claim.
STILL waiting for you to prove your claim that Biden caused insulin prices to go up.
Biden is evil and wishes death on all of humanity.
STILL waiting for you to prove your claim that orgasm exists to stimulate ovulation in women.
Ohhhh you may want to read my original post on that. Yes, do that and get back to me.
STILL waiting for your claim that Biden broke the law when he sold oil from the SPR.
He should have been hung, drawn and quartered for such a violation of law.
STILL waiting for you to prove that just ONE lie in the database of Trump lies was actually a truth.
The one where Trump voiced is opinion on how his wife looks? For some reason the left said his opinion was a lie. That was one specific entry that I shared with you.
STILL waiting for you to prove your claim that people in low wage jobs do not want to get paid more than they already do.
That does not sound remotely close to anything I would claim.
STILL waiting for you to prove your claims that I have lied, made stuff up, altered quotes or screenshots of your words.
The list is growing Rob.
 
You are confidently incorrect, and defending your errors with all you have, which is nothing.
We're talking electronics and electronic circuits. Car stereo systems.

Wires are used in electronics, and in electronic circuits.
Those wires are not bridged, they are connected. They are spliced. They are touching each other directly. There is no "bridge "between them.The solder is not a "bridge". It could be silicone, it could be heat shrink tubing. It could be JB Weld or cyano.
In high voltage circuits, soldering would not even be code. They should be twisted together and wire-nuts put on them.

Go back to school. Learn the basics before you attempt more complex things.

View attachment 63519
So you are denying this correct? Based on what facts or lack there of?

To "bridge" wires means to connect two wires together directly, essentially creating a single point of contact between them; this is usually done by stripping the ends of both wires, twisting the bare strands together, and then optionally securing the connection with solder, a wire nut, or heat shrink tubing, depending on the application and desired level of security.
 
If RobGMN actually did have a shop I am 100% positive that HE and HE alone cause it to fail. He probably had customers who asked him specific questions or wanted specific things and used vocabulary that is commonly used by most people... EXCEPT ROB so he probably drove customers away by arguing with them, correcting them and or trying to educate them.
 
If RobGMN actually did have a shop I am 100% positive that HE and HE alone cause it to fail. He probably had customers who asked him specific questions or wanted specific things and used vocabulary that is commonly used by most people... EXCEPT ROB so he probably drove customers away by arguing with them, correcting them and or trying to educate them.
People just want their stuff installed or to buy something...if they walk in asking for 15" tweeters that go boom...point out a sub and say there ya buddy 🤣🤣🤣
 
How can I agree or disagree with a video that has a jump cut between every word or two that gets spoken?
I could edit a video with jump cuts like that to have Trump say that he killed his ex wife and had *** with the family dog.

Would you believe it was true b/c you saw the video?
Maybe you would.
I believe it because my job requires me to be up to date on anything dealing with real estate.


 
Is it safe to say that no matter what anyone post you will deny it no matter how factual it is and claim the other person is wrong?
That's a nice setup.

If I say yes, then I would be lying. If I say no, then I would be falsely confirming your claim by default.
So you are denying this correct? Based on what facts or lack there of?

To "bridge" wires means to connect two wires together directly, essentially creating a single point of contact between them; this is usually done by stripping the ends of both wires, twisting the bare strands together, and then optionally securing the connection with solder, a wire nut, or heat shrink tubing, depending on the application and desired level of security.
You are asking if I'm denying that my own post is correct?
No, I am not denying that my own post is correct.

No, to "bridge" does NOT mean "to connect two wires together directly".
As a noun, a "bridge" is a an additional thing that in some way connects two or more OTHER things.
As a verb, to "bridge" is "make a bridge over something".

Touching two wires together, twisting two wires together, wire-nutting two wires together, properly using a butt connector to put two wires together, is NOT "bridging" wires.

We are talking car audio. Car audio is electronics. In electronics, a "bridge" is a

The blue wire is a "bridge" between the black and the red/orange.
The black and blue wires are spliced. There is no "bridge".
The blue and red/orange wires are spliced. There is no "bridge".
This is Electronics 101, just like bones having nerves in them is Anatomy 101.

1740619351687.png



SPLICES

1740619659490.png

1740619729127.png
 
Activity
No one is currently typing a reply...

Similar threads

About this thread

Jimi77

Premium Member
CarAudio.com VIP
Thread starter
Jimi77
Joined
Location
Denver, CO
Start date
Participants
Who Replied
Replies
32,962
Views
527,630
Last reply date
Last reply from
deez283
Curves.jpg

ThxOne

    May 25, 2026
  • 0
  • 0
IMG_20260506_140749.jpg

74eldiablo

    May 22, 2026
  • 0
  • 0

New threads

Top