it's quite difficult to get my cuts absolutely perfect. What do you guys do to completely seal off the small crevices between sides? I understand the box needs to be sealed pretty tight, so how do you guys get there? Any sealant I need or something?
Good to know. Im using wood glue to put the box together, and probably will use a nail gun to. Me and my grandpa really fixed up the cuts, but theres bound to be some small cracks.Wood glue. Some guys use caulk or fiberglass resin. Just depends how bad your cuts really are. BTW, if you do use caulk, allow it 24 hours to cure before installing the subs, as some types of caulk will harm some types of surrounds with off-gassing during the curing process.
I highly recommend wood screws. And pre-drill the holes for the screws because sometimes the wood will split without pre-drilling first.Good to know. Im using wood glue to put the box together, and probably will use a nail gun to. Me and my grandpa really fixed up the cuts, but theres bound to be some small cracks.
Good to know. Im using wood glue to put the box together, and probably will use a nail gun to. Me and my grandpa really fixed up the cuts, but theres bound to be some small cracks.
Good to know. Im using wood glue to put the box together, and probably will use a nail gun to. Me and my grandpa really fixed up the cuts, but theres bound to be some small cracks.