DOOM_NX 10+ year member
Member
2 x 95W RMS 4Ohm speakers
1 x 60W RMS per channel 4Ohm amplifier (total 4 channels)
To set gains with a DMM, I used the following formula: sqrt(60W * 4Ohm)= 15.49V
So amplifier is giving 60W, speaker can take up to 95W. Yet when playing 1kHz sine wave at 0dB it sounds distorted. What's wrong? //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif
1 x 60W RMS per channel 4Ohm amplifier (total 4 channels)
To set gains with a DMM, I used the following formula: sqrt(60W * 4Ohm)= 15.49V
So amplifier is giving 60W, speaker can take up to 95W. Yet when playing 1kHz sine wave at 0dB it sounds distorted. What's wrong? //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif