Box bracing?

The first one I built was 9.8 cu. ft. This one is 7 cu. ft. The first one was flexing like crazy and that's why I added braces to the second one. I used the triangular mdf braces. I might be able to knock a few of them out with a hammer, but that liquid nails is strong as hell?

 
The first one I built was 9.8 cu. ft. This one is 7 cu. ft. The first one was flexing like crazy and that's why I added braces to the second one. I used the triangular mdf braces. I might be able to knock a few of them out with a hammer, but that liquid nails is strong as hell?
liquid nails+MDF does not equal strong bond. liquid nails shouldnt be used on mdf at all.

 
liquid nails+MDF does not equal strong bond. liquid nails shouldnt be used on mdf at all.
I disagree. Sometimes you'll break the mdf before you could separate 2 pieces of mdf. The bond is strong enough for me. I also use screws. I have used wood glue on other boxes and I like liquid nails better. When I break a box apart I'll stop using liquid nails, but I have a better chance of getting struck by lightning.

 
I disagree. Sometimes you'll break the mdf before you could separate 2 pieces of mdf. The bond is strong enough for me. I also use screws. I have used wood glue on other boxes and I like liquid nails better. When I break a box apart I'll stop using liquid nails, but I have a better chance of getting struck by lightning.
2 15"s and 1.2k blew a box i built with screws/liquid nails apart. more like wood slapping than exploding but w.e.

 
2 15"s and 1.2k blew a box i built with screws/liquid nails apart. more like wood slapping than exploding but w.e.
User error. I've always used liquid nails and never had a problem. It laughs at my 18" BTL with 3000wrms.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Start by laying the larger bottom panel in an open space, then slowly “dry” assemble it by laying the pieces where they go like a puzzle. It...
1
293
These are also very good drivers, some of the best bang for the busk on shallow mounts. DD Audio SL610-D2 10"...
5
471
The it to a custom air brush guy and tell him what you want. You can always stain, plexiglass windows, and put led lights inside the box. Search...
6
657
Thanks man! Quitting drinking and battling DRESS syndrome has given me a new outlook on life.
8
973
i have a 15 already for the lows ita a little over kill for a crew cab but I like it and I was hoping it would sound better and louder than my old...
7
782

About this thread

Bass911

10+ year member
CarAudio.com Elite
Thread starter
Bass911
Joined
Location
Dallas,TX
Start date
Participants
Who Replied
Replies
54
Views
2,521
Last reply date
Last reply from
Bobby322
Buick Amp Connector.JPG

maylar

    Jun 2, 2024
  • 0
  • 0
1717274743729.png

Doxquzme

    Jun 1, 2024
  • 0
  • 0

New threads

Top