Want to get some practice on designing sub boxes, will do 2 for free
- Thread starter FurbiesAndBeans
- Start date
- Replies 13
- Views 636
FurbiesAndBeans
Fiendstolemyamp 10+ year member
Call of the Wintermoon
You can do one for me if you want. Gonna build something for my brothers car.
just designing? how bought building lol.. I have my own design you build it cool?
OP
FurbiesAndBeans 10+ year member
CarAudio.com Elite
- Thread Starter
- #4
Shoot me a PM with the size you want, tuning, and dimensions. If you want it with a double baffle or flush mount.
---------- Post added at 06:31 PM ---------- Previous post was at 06:30 PM ----------
I'll do a sketch up lol not building though...
Fiendstolemyamp 10+ year member
Call of the Wintermoon
mmkay, i'll send you something in just a sec.
Fiendstolemyamp 10+ year member
Call of the Wintermoon
Pm's are full.
lol man i thought you was building it also at first... i was about to be like i'll take a free box...
OP
FurbiesAndBeans 10+ year member
CarAudio.com Elite
- Thread Starter
- #8
Cleared. When did they lower the max to 100? **** thats little...
OP
FurbiesAndBeans 10+ year member
CarAudio.com Elite
- Thread Starter
- #9
Here's the box. It came out to 1.9 cu ft with a 34hz tuning.
do one for me?
THATpurpleKUSH 5,000+ posts
Fuckyou
why no 45s in the corners with all those bends?
OP
FurbiesAndBeans 10+ year member
CarAudio.com Elite
- Thread Starter
- #12
Sure, send me a PM with what you need
---------- Post added at 12:52 PM ---------- Previous post was at 12:51 PM ----------
Good idea. Forgot about 45s. They'e not hard to implement though.
pm sent
OP
FurbiesAndBeans 10+ year member
CarAudio.com Elite
- Thread Starter
- #14
Here's with 45s, the size of the longer side is 2", short side is .5"
Activity
No one is currently typing a reply...
Similar threads
I have been attempting to study the true nature of why we tend to tune transmission lines and enclosures in general like we do, the nature of...
- Started by Buck
- Enclosure Design & Construction
I want to try my hand at a ported box for one IDQ12. I built a sealed box a few years ago and it sounds good but I want to see how ported...
- Started by de8212
- Enclosure Design & Construction
First and foremost is that the sub must be designed to work in a small enclosure. If not designed for it, you may end up with less bass than the...
- Started by vlusardi
- Enclosure Design & Construction
Defiantly. LOL 😂 It has never happened to me👀:poop:
- Started by Evan Kays
- General Car Audio
Using a Y RCA to split signal from amp to amp to give both amps the signal they need from the HU and subs in different /separate enclosures tuned...
- Started by Aaron Johnson
- General Car Audio
About this thread
- Start date
- Participants
- Who Replied
- Replies
- 13
- Views
- 636
- Last reply date
- Last reply from
- FurbiesAndBeans
