I built a small slanted sealed box (~1 cube)) for a 12 inch Memphis PR, just to throw in the trunk of a 97 Crown Vic. It just sat in the bottom of the trunk on the drivers side.
It sounded better than I thought it would, but began building another sealed box to the exact specs (1.25 cubes) to place over the rear end and fire upwards into the rear deck. I have it bolted down and hits very mellow compared to the old box/ location. When I crack the trunk open ~3" in the rear I can tell a very noticable difference.
The sub is mostly on the drivers side, about 8 inches from being in the middle of the car...
I've read about venting the rear deck, but still unsure of where to place the vents: Over the sub, off to the side...? Or is the idea just to give it some air???
I plan on taking out the rear 6x9s and rear seat padding but I dont think that will very help as much. I've also thought about cutting out the cardboard material from the carpet, but havent taken a look to see if its glued to it.
I know its an up hill battle with a trunk car, but any help would be great //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif
It sounded better than I thought it would, but began building another sealed box to the exact specs (1.25 cubes) to place over the rear end and fire upwards into the rear deck. I have it bolted down and hits very mellow compared to the old box/ location. When I crack the trunk open ~3" in the rear I can tell a very noticable difference.
The sub is mostly on the drivers side, about 8 inches from being in the middle of the car...
I've read about venting the rear deck, but still unsure of where to place the vents: Over the sub, off to the side...? Or is the idea just to give it some air???
I plan on taking out the rear 6x9s and rear seat padding but I dont think that will very help as much. I've also thought about cutting out the cardboard material from the carpet, but havent taken a look to see if its glued to it.
I know its an up hill battle with a trunk car, but any help would be great //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif