streakz
Junior Member
Are these specifications okay?? It's a vented Trapezoid enclosure:
Height? = 20 Inches
Width? = 18 Inches
Depth1? = 6 Inches
Depth2? = 18 Inches
If the above dimensions are OUTSIDE dimensions, enter the thickness of the wood below.
Wood Thickness? = .5 Inches
Speaker Displacement? = 1 Ft³
Port Frequency? = 35 Hertz
Port Diameter? = 2 Inches
Number of Ports? = 1
Sq. Port Ratio H:W? = 1:
Data Output:
Box Front Angle = 59 Degrees
Gross box volume = 1.056 Ft3
Net box volume = 1.047 Ft3
Port Length = 5.102 Inches
Port Area = 3.142 Inches2
Port Volume = .009 Ft3
What should I change to improve it?
Height? = 20 Inches
Width? = 18 Inches
Depth1? = 6 Inches
Depth2? = 18 Inches
If the above dimensions are OUTSIDE dimensions, enter the thickness of the wood below.
Wood Thickness? = .5 Inches
Speaker Displacement? = 1 Ft³
Port Frequency? = 35 Hertz
Port Diameter? = 2 Inches
Number of Ports? = 1
Sq. Port Ratio H:W? = 1:
Data Output:
Box Front Angle = 59 Degrees
Gross box volume = 1.056 Ft3
Net box volume = 1.047 Ft3
Port Length = 5.102 Inches
Port Area = 3.142 Inches2
Port Volume = .009 Ft3
What should I change to improve it?