Zv5 10 or xv2 10?

[Aygodriver1212]

@sundownz, SPL curve in winisd looks weird (image 1), the Z v.5 10 has a weird spike again at around 40+ hz while the x-10 completely falls off, don't know whether that's good or bad. At image 2 you see transfer function mag, looks much flatter than the x-10 in a ported am I right?

NOTE: THIS IS ON AROUND 2KW

 

[Aygodriver1212]

B, anyone with WinISD experience mind looking at my previous post in the thread? ^

 

[sundownz Pro Seller]

[quote name='Aygodriver1212']I thought I asked somewhere, but I noticed the d1 has lower Fs, is this something to take in to account? @sundownz[/QUOTE]

Not really... you can measure T/S on a different day and get some variation even on the same woofer.

 

[sundownz Pro Seller]

B, anyone with WinISD experience mind looking at my previous post in the thread? ^

I would ignore anything in WinISD regarding applying wattage -- just look at the transfer function graph.

 

[Aygodriver1212]

I would ignore anything in WinISD regarding applying wattage -- just look at the transfer function graph.

Looks good and should play clean and stay under 100 ft/s at 2500 watts with my calculated port.