Tubermaguber
Dazed n confused
Item(s) for Sale:
A used Zapco Reference series 1000.4
Class AB topology.
Underrated power with quality hardware inside.
Not in pictures (I forgot), but included is two slidnt connectors.
Item(s) Description/Condition:
Amp has been thoroughly used, but TO MY KNOWLEDGE has never been repaired, which is expected with a quality brand, anyways.
Cosmetically, the amp has seen better days: 6.5/10 (I'm being very critical). Is missing a cover on one end where a fan was in place, though it does not overheat without one. Several holes in the heatsink, or fins, which were used to mount the amp. Drilling these holes scuffed the top most part of the fins, unfortunately.
Functionality is 10/10 with not a single problem and has many hours accounted for as it was in my DD.
I removed the set screws for the 12v and ground terminals and installed some lugs for easier connections with larger guage wire.
Price:
$200 OBO shipped to CONUS
Entertaining trades as well, most anything of value is welcome and will be considered, though $$$ preferred.
Shipping and Miscellaneous Item Information:
Included in pricing.
Item Pictures:
(List pictures in this section, 1st picture should be your username/date if you have less than 10 positive feedbacks with the i-Trader system or less than 10 references that you have sold to in the past. (These must be listed in your signature, or a link provided to a feedback thread listing these references)).
Apologize for the green ink. Made a b/w pic so the username/date was more legible.
A used Zapco Reference series 1000.4
Class AB topology.
Underrated power with quality hardware inside.
Not in pictures (I forgot), but included is two slidnt connectors.
Item(s) Description/Condition:
Amp has been thoroughly used, but TO MY KNOWLEDGE has never been repaired, which is expected with a quality brand, anyways.
Cosmetically, the amp has seen better days: 6.5/10 (I'm being very critical). Is missing a cover on one end where a fan was in place, though it does not overheat without one. Several holes in the heatsink, or fins, which were used to mount the amp. Drilling these holes scuffed the top most part of the fins, unfortunately.
Functionality is 10/10 with not a single problem and has many hours accounted for as it was in my DD.
I removed the set screws for the 12v and ground terminals and installed some lugs for easier connections with larger guage wire.
Price:
$200 OBO shipped to CONUS
Entertaining trades as well, most anything of value is welcome and will be considered, though $$$ preferred.
Shipping and Miscellaneous Item Information:
Included in pricing.
Item Pictures:
(List pictures in this section, 1st picture should be your username/date if you have less than 10 positive feedbacks with the i-Trader system or less than 10 references that you have sold to in the past. (These must be listed in your signature, or a link provided to a feedback thread listing these references)).
Apologize for the green ink. Made a b/w pic so the username/date was more legible.