zapco 9.0

Are you referring to the Competition series 9.0x?? It's a bad *** amp if you are:

Class D for the Audiophile



We saw our first Class D amp in 1975. Numerous companies have

been trying since then to design and build a full range Class D, with very

little success. Class D amps have had so much noise and distortion that

they destroy mids and highs. Even when used strictly as bass amps

they’ve been dangerous. Competitors who use class D amps in SPL cars

invariably blow out all their woofers when they hit those high numbers.

This happens because of the extreme distortion the class D amps have

been putting out when they’re driven hard. This may be acceptable to

professional competitors, who get their speakers for free, but for the noncompetitor

who has to pay for them out of their own pocket, it can be a real

nightmare. Not to mention that most of us want to be able to listen to

music in our cars and need an amp that sounds great on everything, not

just woofers.

Welcome to ZAPCO’s world! Where dreams of Class D power, and full

range sound quality come true.

The ZAPCO C2K 9.0XD is the ultimate car audio amp in so many

ways. The first, of course is power. With over 2000 watts RMS into either 2

Ohms or 4 Ohms, and a chassis only 18" long, it’s easily the most powerful

amp of its size. But that’s only the start of the story. The 9.0XD has the

most advanced microprocessor control system ever offered in a car audio

amplifier. This amp has a serial port that allows it to talk to other amps, to

a PC, or even to your car. It can be programmed to control its own power

output and clipping levels. The microprocessor system in this amp will be

the heart of our new systems as we move into the realm of full digital, from

source to speaker output. With all of it being brought to you by ZAPCO.

When you’re ready for the ultimate in car audio, ZAPCO has your

product.



 
must be nice to have money!
yah it must be... but when they get bored with these amps we get a **** good deal for used amps //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif... I got my zapco ref 350.2 for $150 shipped //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 
yah it must be... but when they get bored with these amps we get a **** good deal for used amps //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif... I got my zapco ref 350.2 for $150 shipped //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

when i get this im also getting a i force 2100 for my 6.5's.....i hope i dont get bored with this amp cause what else is there out there thats just as good or better:D

 
when i get this im also getting a i force 2100 for my 6.5's.....i hope i dont get bored with this amp cause what else is there out there thats just as good or better:D
Well that's easy....more Zapco amps!!//content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif I'd run one per channel if it was feasible //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 
you mean what amp per sub?
that would be cool lol but way to expensive for just my application
No, more like one amp per speaker....the ultimate in channel seperation....totally not realistic or anything, but you asked what could be better than Zapco and I replied with MORE Zapco //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif Anyways, just ignore my stupid remarks. //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 
No, more like one amp per speaker....the ultimate in channel seperation....totally not realistic or anything, but you asked what could be better than Zapco and I replied with MORE Zapco //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif Anyways, just ignore my stupid remarks. //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif


i have to admit it would be cool though

 
well if you got cash there are lots of options... you could try Brax, McIntosh, Helix (by brax), DLS, US AMPS, TRU, Audison, Carver (I think they made the tube amps) and you could even try out some "old school" gear....

 
when i get this im also getting a i force 2100 for my 6.5's.....i hope i dont get bored with this amp cause what else is there out there thats just as good or better:D
you won't be disappointed, it's a strong capable and clean amplifier... it could just use more features... but that's why it's so cheap for a zapco //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

MTXThunder9500

10+ year member
Fo Shizzle
Thread starter
MTXThunder9500
Joined
Location
Fargo, ND
Start date
Participants
Who Replied
Replies
21
Views
3,553
Last reply date
Last reply from
brypink
1778763859842.png

Doxquzme

    May 14, 2026
  • 0
  • 0
IMG_20260513_214311575.jpg

ThxOne

    May 13, 2026
  • 0
  • 0

New threads

Top