Yet another Big 3 question

BNolan12
10+ year member

CarAudio.com Elite
Ok guys getting ready to do big 3 and I have a question.. I found my alt + to battery + and I found battery negative to chassis. Where is the engine ground to chassis usually located or is this a connection that is not previously there and that I'm making in addition to the other two? Sorry if this is a dumb/stupid question, I'm just not sure about this. Any help appreciated.

 
mine was a little braided wire ,but u can just add another engine ground from engine to shock tower , u may b all day try to find that ground i just left my factory ground and added the 0 gauge ground

 
On the two vehicles I've done the big 3 on they were both a braided wire on the bottom of the engine block to the frame. Get underneath and look around for a flat braided wire. Or you can just do another in a different location if you can find a good one.

 
On a lot of cars you will see a wire coming off the battery negative and going toward the engine somewhere. Many will go down to around the starter or transmission. Also, how is the strut tower not a good place for the ground? As long as you sand the paint down, you have access to the body as well as a bolt that will connect to the frame of the car.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

BNolan12

10+ year member
CarAudio.com Elite
Thread starter
BNolan12
Joined
Location
Lafayette, LA
Start date
Participants
Who Replied
Replies
4
Views
601
Last reply date
Last reply from
accuab
IMG_20260516_193114554_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0
IMG_20260516_192955471_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0

New threads

Top