Looking to trade my Rockford X1000.1 for a 5 channel amp. $$$160$$$ shipped in the US
I have up to $50 to add on top of a trade.
NO END CAPS!
Cosmetic: 7/10 Mechanical: 10/10
Specs:
Frequency Response: 10-250Hz ± 3dB
Bandwidth: 10-250Hz ± 3dB
Input Sensitivity: 125mV to 2.8V
Protection: Over - current protection
Battery under - over voltage protection
Thermal protection
Battery Fuse: 100 Amperes
Input Impedance: 20kΩ
Number of Channels: Mono Amplifier
RMS Continuous Power: 500W into 4Ω
with
1000W into 2Ω
with
Signal to Noise Ratio: 90dB A-weighted
Crossover Slope: 24dB/octave Butterworth
Crossover Frequency Range: 50 to 250Hz
Recommended Fuse: 100amps*
I have up to $50 to add on top of a trade.
NO END CAPS!
Cosmetic: 7/10 Mechanical: 10/10
Specs:
Frequency Response: 10-250Hz ± 3dB
Bandwidth: 10-250Hz ± 3dB
Input Sensitivity: 125mV to 2.8V
Protection: Over - current protection
Battery under - over voltage protection
Thermal protection
Battery Fuse: 100 Amperes
Input Impedance: 20kΩ
Number of Channels: Mono Amplifier
RMS Continuous Power: 500W into 4Ω
with
1000W into 2Ω
with
Signal to Noise Ratio: 90dB A-weighted
Crossover Slope: 24dB/octave Butterworth
Crossover Frequency Range: 50 to 250Hz
Recommended Fuse: 100amps*
Last edited by a moderator:
