3 items im looking to trade or sell, im looking for 8's or 10's. Some of the subs I would be interested in are SA 8's, dd1508's, or maybe some dcons. Just me let know what you have the worst I can say is no. If they are are really nice subs and im interested and you are only interested in one or two then I may put in some money to satisfy both sides. The reason im getting rid of all my equipment is I bought a new car and keeping the stock system for now but would like to add some bass to start with.
item #1 Image Dynamics CTX65cs component speakers, excellent budget comps as they are in great condition.Comes with tweeters with mounts, crossovers, and two 6.5 speakers
Original owner and had them installed by me in my car for little over 3 years
specs
6-1/2" CTX Series 2-Way Car Component Speaker System
Power Handling:
Peak: 400 watts per set / 200 watts each side
RMS: 200 watts per set / 100 watts each side
Recommended Power Range: 25-200 watts per side
Mica-Polymer cone
Butyl rubber surround
Silk dome tweeter
High-energy neodymium tweeter magnets
4 ohms impedance
High temperature and high power voice coil
Sensitivity: 89 dB
Frequency Response: 55-25,000 Hz
Top-mount depth: 2-3/4"
item #2 Alpine 9887 with KCE-422i IPOD CABLE and ai net to 3.5mm for aux , excellent head unit with active 3-way control. I am the original owner of 3+ years, has some signs of button wear but 100% fully functional. Also have remote to go with it
specs
Alpine Electronics of America, Inc.
item #3 PPI BK340.4 Black Ice Amp is in excellent condition, barely 6 months old very powerful 4 ch amp. Active crossovers on this amp , I am the original owner and I still believe its under warranty and I have the original box too.
specs
Power Ratings:
55 watts x 4 @ 4 ohms
85 watts x 4 @ 2 ohms
170 watts x 2 @ 4 ohms
Black Acrylic Surface
PWM MOSFET power supply
Variable Bass Boost (0, 6, 12 dB at 55 Hz)
SMT(Surface mount technology) Circuity
Variable 12dB high, low, & subsonic filters
Dash mount remote gain control included
Band-pass crossovers
Brushed aluminum finish
Balanced signal input
Turn on/off delay
Tri Mode capable
Heavy duty aluminum alloy heatsink efficient heat dissipation
Nickel-plated RCA level inputs
Nickel-plated screw terminals
Damping factor: >200
Variable 180° phase control
Total harmonic distortion: 0.5%
Input sensitivity: 0.2V-5V
Dimensions: 11-1/4"L x 8-1/4"W x 2"H
price
1.100 shipped
2.200 shipped
3.90 shipped
pics
can take better pics of amp if you are interested
item #1 Image Dynamics CTX65cs component speakers, excellent budget comps as they are in great condition.Comes with tweeters with mounts, crossovers, and two 6.5 speakers
Original owner and had them installed by me in my car for little over 3 years
specs
6-1/2" CTX Series 2-Way Car Component Speaker System
Power Handling:
Peak: 400 watts per set / 200 watts each side
RMS: 200 watts per set / 100 watts each side
Recommended Power Range: 25-200 watts per side
Mica-Polymer cone
Butyl rubber surround
Silk dome tweeter
High-energy neodymium tweeter magnets
4 ohms impedance
High temperature and high power voice coil
Sensitivity: 89 dB
Frequency Response: 55-25,000 Hz
Top-mount depth: 2-3/4"
item #2 Alpine 9887 with KCE-422i IPOD CABLE and ai net to 3.5mm for aux , excellent head unit with active 3-way control. I am the original owner of 3+ years, has some signs of button wear but 100% fully functional. Also have remote to go with it
specs
Alpine Electronics of America, Inc.
item #3 PPI BK340.4 Black Ice Amp is in excellent condition, barely 6 months old very powerful 4 ch amp. Active crossovers on this amp , I am the original owner and I still believe its under warranty and I have the original box too.
specs
Power Ratings:
55 watts x 4 @ 4 ohms
85 watts x 4 @ 2 ohms
170 watts x 2 @ 4 ohms
Black Acrylic Surface
PWM MOSFET power supply
Variable Bass Boost (0, 6, 12 dB at 55 Hz)
SMT(Surface mount technology) Circuity
Variable 12dB high, low, & subsonic filters
Dash mount remote gain control included
Band-pass crossovers
Brushed aluminum finish
Balanced signal input
Turn on/off delay
Tri Mode capable
Heavy duty aluminum alloy heatsink efficient heat dissipation
Nickel-plated RCA level inputs
Nickel-plated screw terminals
Damping factor: >200
Variable 180° phase control
Total harmonic distortion: 0.5%
Input sensitivity: 0.2V-5V
Dimensions: 11-1/4"L x 8-1/4"W x 2"H
price
1.100 shipped
2.200 shipped
3.90 shipped
pics
can take better pics of amp if you are interested
