1. Product: DC LV5 15D1
2. Specs:
Mounting Depth 9.5
Mounting Hole Diameter 14"
Motor Width 9.84"
Weight 78.25lbs
VC Diameter 3" Flat 8 layer
Magnet Weight 73lbs
Power Handling RMS/Peak 2000/4000 20,000 burst
Impedance D 1 or 2ohm D
Sd 791.00 cm²
Suggested Sealed N/A N/A N/A
Suggested Ported 3.5³ ft
Suggested SPL Ported ft 5³
http://www.dcsoundlab.com/specs.html
3.Description/Condition:
This is an great sub. Has a VERY small hole in the foam where the screw driver sliped an poked it DOES NOT HURT THE PERFORMANCE JUST THE LOOKS, other than that its in great shape. ( has never been reconed) bought it new.
It has been siliconed on the back side of the hole, so that it will not rip no further. i spoke to Rusty an that is what he told me to do.
performance 10/10
looks 8/10
4. What you are looking for: :
i am looking for some 10''s, 12''s, or, 15''s
2. Specs:
Mounting Depth 9.5
Mounting Hole Diameter 14"
Motor Width 9.84"
Weight 78.25lbs
VC Diameter 3" Flat 8 layer
Magnet Weight 73lbs
Power Handling RMS/Peak 2000/4000 20,000 burst
Impedance D 1 or 2ohm D
Sd 791.00 cm²
Suggested Sealed N/A N/A N/A
Suggested Ported 3.5³ ft
Suggested SPL Ported ft 5³
http://www.dcsoundlab.com/specs.html
3.Description/Condition:
This is an great sub. Has a VERY small hole in the foam where the screw driver sliped an poked it DOES NOT HURT THE PERFORMANCE JUST THE LOOKS, other than that its in great shape. ( has never been reconed) bought it new.
It has been siliconed on the back side of the hole, so that it will not rip no further. i spoke to Rusty an that is what he told me to do.
performance 10/10
looks 8/10
4. What you are looking for: :
i am looking for some 10''s, 12''s, or, 15''s
